adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2012 The Android Open Source Project
|
|
|
|
*
|
|
|
|
* Licensed under the Apache License, Version 2.0 (the "License");
|
|
|
|
* you may not use this file except in compliance with the License.
|
|
|
|
* You may obtain a copy of the License at
|
|
|
|
*
|
|
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
*
|
|
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
|
|
* See the License for the specific language governing permissions and
|
|
|
|
* limitations under the License.
|
|
|
|
*/
|
|
|
|
|
2015-09-22 22:52:57 +00:00
|
|
|
#define TRACE_TAG AUTH
|
2015-03-19 22:21:08 +00:00
|
|
|
|
|
|
|
#include "sysdeps.h"
|
|
|
|
#include "adb_auth.h"
|
|
|
|
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
#include <stdio.h>
|
2014-11-06 22:34:24 +00:00
|
|
|
#include <stdlib.h>
|
2015-03-19 22:21:08 +00:00
|
|
|
#include <string.h>
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
|
|
|
|
#ifdef _WIN32
|
2014-11-06 22:34:24 +00:00
|
|
|
# ifndef WIN32_LEAN_AND_MEAN
|
|
|
|
# define WIN32_LEAN_AND_MEAN
|
|
|
|
# endif
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
# include "windows.h"
|
|
|
|
# include "shlobj.h"
|
|
|
|
#else
|
|
|
|
# include <sys/types.h>
|
|
|
|
# include <sys/stat.h>
|
|
|
|
# include <unistd.h>
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#include "adb.h"
|
|
|
|
|
|
|
|
/* HACK: we need the RSAPublicKey struct
|
|
|
|
* but RSA_verify conflits with openssl */
|
|
|
|
#define RSA_verify RSA_verify_mincrypt
|
|
|
|
#include "mincrypt/rsa.h"
|
|
|
|
#undef RSA_verify
|
|
|
|
|
2015-12-05 06:00:26 +00:00
|
|
|
#include <android-base/strings.h>
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
#include <cutils/list.h>
|
|
|
|
|
|
|
|
#include <openssl/evp.h>
|
|
|
|
#include <openssl/objects.h>
|
|
|
|
#include <openssl/pem.h>
|
|
|
|
#include <openssl/rsa.h>
|
|
|
|
#include <openssl/sha.h>
|
|
|
|
|
2014-09-03 21:34:47 +00:00
|
|
|
#if defined(OPENSSL_IS_BORINGSSL)
|
|
|
|
#include <openssl/base64.h>
|
|
|
|
#endif
|
|
|
|
|
2015-07-09 20:35:09 +00:00
|
|
|
#define ANDROID_PATH ".android"
|
|
|
|
#define ADB_KEY_FILE "adbkey"
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
|
|
|
|
struct adb_private_key {
|
|
|
|
struct listnode node;
|
|
|
|
RSA *rsa;
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct listnode key_list;
|
|
|
|
|
|
|
|
|
|
|
|
/* Convert OpenSSL RSA private key to android pre-computed RSAPublicKey format */
|
|
|
|
static int RSA_to_RSAPublicKey(RSA *rsa, RSAPublicKey *pkey)
|
|
|
|
{
|
|
|
|
int ret = 1;
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
BN_CTX* ctx = BN_CTX_new();
|
|
|
|
BIGNUM* r32 = BN_new();
|
|
|
|
BIGNUM* rr = BN_new();
|
|
|
|
BIGNUM* r = BN_new();
|
|
|
|
BIGNUM* rem = BN_new();
|
|
|
|
BIGNUM* n = BN_new();
|
|
|
|
BIGNUM* n0inv = BN_new();
|
|
|
|
|
|
|
|
if (RSA_size(rsa) != RSANUMBYTES) {
|
|
|
|
ret = 0;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
BN_set_bit(r32, 32);
|
|
|
|
BN_copy(n, rsa->n);
|
|
|
|
BN_set_bit(r, RSANUMWORDS * 32);
|
|
|
|
BN_mod_sqr(rr, r, n, ctx);
|
|
|
|
BN_div(NULL, rem, n, r32, ctx);
|
|
|
|
BN_mod_inverse(n0inv, rem, r32, ctx);
|
|
|
|
|
|
|
|
pkey->len = RSANUMWORDS;
|
|
|
|
pkey->n0inv = 0 - BN_get_word(n0inv);
|
|
|
|
for (i = 0; i < RSANUMWORDS; i++) {
|
|
|
|
BN_div(rr, rem, rr, r32, ctx);
|
|
|
|
pkey->rr[i] = BN_get_word(rem);
|
|
|
|
BN_div(n, rem, n, r32, ctx);
|
|
|
|
pkey->n[i] = BN_get_word(rem);
|
|
|
|
}
|
|
|
|
pkey->exponent = BN_get_word(rsa->e);
|
|
|
|
|
|
|
|
out:
|
|
|
|
BN_free(n0inv);
|
|
|
|
BN_free(n);
|
|
|
|
BN_free(rem);
|
|
|
|
BN_free(r);
|
|
|
|
BN_free(rr);
|
|
|
|
BN_free(r32);
|
|
|
|
BN_CTX_free(ctx);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void get_user_info(char *buf, size_t len)
|
|
|
|
{
|
|
|
|
char hostname[1024], username[1024];
|
2014-11-13 23:17:29 +00:00
|
|
|
int ret = -1;
|
|
|
|
|
|
|
|
if (getenv("HOSTNAME") != NULL) {
|
|
|
|
strncpy(hostname, getenv("HOSTNAME"), sizeof(hostname));
|
|
|
|
hostname[sizeof(hostname)-1] = '\0';
|
|
|
|
ret = 0;
|
|
|
|
}
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
|
|
|
|
#ifndef _WIN32
|
|
|
|
if (ret < 0)
|
2014-11-13 23:17:29 +00:00
|
|
|
ret = gethostname(hostname, sizeof(hostname));
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
#endif
|
2014-11-13 23:17:29 +00:00
|
|
|
if (ret < 0)
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
strcpy(hostname, "unknown");
|
|
|
|
|
2014-11-13 23:17:29 +00:00
|
|
|
ret = -1;
|
|
|
|
|
|
|
|
if (getenv("LOGNAME") != NULL) {
|
|
|
|
strncpy(username, getenv("LOGNAME"), sizeof(username));
|
|
|
|
username[sizeof(username)-1] = '\0';
|
|
|
|
ret = 0;
|
|
|
|
}
|
|
|
|
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
#if !defined _WIN32 && !defined ADB_HOST_ON_TARGET
|
|
|
|
if (ret < 0)
|
2014-11-13 23:17:29 +00:00
|
|
|
ret = getlogin_r(username, sizeof(username));
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
#endif
|
2014-11-13 23:17:29 +00:00
|
|
|
if (ret < 0)
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
strcpy(username, "unknown");
|
|
|
|
|
|
|
|
ret = snprintf(buf, len, " %s@%s", username, hostname);
|
|
|
|
if (ret >= (signed)len)
|
|
|
|
buf[len - 1] = '\0';
|
|
|
|
}
|
|
|
|
|
|
|
|
static int write_public_keyfile(RSA *private_key, const char *private_key_path)
|
|
|
|
{
|
|
|
|
RSAPublicKey pkey;
|
2014-09-03 21:34:47 +00:00
|
|
|
FILE *outfile = NULL;
|
2015-07-13 18:12:28 +00:00
|
|
|
char path[PATH_MAX], info[MAX_PAYLOAD_V1];
|
2015-02-26 01:51:28 +00:00
|
|
|
uint8_t* encoded = nullptr;
|
2014-09-03 21:34:47 +00:00
|
|
|
size_t encoded_length;
|
|
|
|
int ret = 0;
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
|
2014-09-03 21:34:47 +00:00
|
|
|
if (snprintf(path, sizeof(path), "%s.pub", private_key_path) >=
|
|
|
|
(int)sizeof(path)) {
|
2015-09-03 00:44:28 +00:00
|
|
|
D("Path too long while writing public key");
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
return 0;
|
2014-09-03 21:34:47 +00:00
|
|
|
}
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
|
2014-09-03 21:34:47 +00:00
|
|
|
if (!RSA_to_RSAPublicKey(private_key, &pkey)) {
|
2015-09-03 00:44:28 +00:00
|
|
|
D("Failed to convert to publickey");
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-05-08 02:08:29 +00:00
|
|
|
outfile = fopen(path, "w");
|
2014-09-03 21:34:47 +00:00
|
|
|
if (!outfile) {
|
2015-09-03 00:44:28 +00:00
|
|
|
D("Failed to open '%s'", path);
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-09-03 00:44:28 +00:00
|
|
|
D("Writing public key to '%s'", path);
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
|
2014-09-03 21:34:47 +00:00
|
|
|
#if defined(OPENSSL_IS_BORINGSSL)
|
|
|
|
if (!EVP_EncodedLength(&encoded_length, sizeof(pkey))) {
|
2015-09-03 00:44:28 +00:00
|
|
|
D("Public key too large to base64 encode");
|
2014-09-03 21:34:47 +00:00
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
/* While we switch from OpenSSL to BoringSSL we have to implement
|
|
|
|
* |EVP_EncodedLength| here. */
|
|
|
|
encoded_length = 1 + ((sizeof(pkey) + 2) / 3 * 4);
|
|
|
|
#endif
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
|
2015-04-25 06:02:00 +00:00
|
|
|
encoded = new uint8_t[encoded_length];
|
2015-02-26 01:51:28 +00:00
|
|
|
if (encoded == nullptr) {
|
2015-09-03 00:44:28 +00:00
|
|
|
D("Allocation failure");
|
2014-09-03 21:34:47 +00:00
|
|
|
goto out;
|
|
|
|
}
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
|
2014-09-03 21:34:47 +00:00
|
|
|
encoded_length = EVP_EncodeBlock(encoded, (uint8_t*) &pkey, sizeof(pkey));
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
get_user_info(info, sizeof(info));
|
|
|
|
|
2014-09-03 21:34:47 +00:00
|
|
|
if (fwrite(encoded, encoded_length, 1, outfile) != 1 ||
|
|
|
|
fwrite(info, strlen(info), 1, outfile) != 1) {
|
2015-09-03 00:44:28 +00:00
|
|
|
D("Write error while writing public key");
|
2014-09-03 21:34:47 +00:00
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = 1;
|
|
|
|
|
|
|
|
out:
|
|
|
|
if (outfile != NULL) {
|
|
|
|
fclose(outfile);
|
|
|
|
}
|
2015-04-25 06:02:00 +00:00
|
|
|
delete[] encoded;
|
2014-09-03 21:34:47 +00:00
|
|
|
return ret;
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int generate_key(const char *file)
|
|
|
|
{
|
|
|
|
EVP_PKEY* pkey = EVP_PKEY_new();
|
|
|
|
BIGNUM* exponent = BN_new();
|
|
|
|
RSA* rsa = RSA_new();
|
2012-08-31 19:14:21 +00:00
|
|
|
mode_t old_mask;
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
FILE *f = NULL;
|
|
|
|
int ret = 0;
|
|
|
|
|
2015-09-03 00:44:28 +00:00
|
|
|
D("generate_key '%s'", file);
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
|
|
|
|
if (!pkey || !exponent || !rsa) {
|
2015-09-03 00:44:28 +00:00
|
|
|
D("Failed to allocate key");
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
BN_set_word(exponent, RSA_F4);
|
|
|
|
RSA_generate_key_ex(rsa, 2048, exponent, NULL);
|
|
|
|
EVP_PKEY_set1_RSA(pkey, rsa);
|
|
|
|
|
2012-08-31 19:14:21 +00:00
|
|
|
old_mask = umask(077);
|
|
|
|
|
2015-05-08 02:08:29 +00:00
|
|
|
f = fopen(file, "w");
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
if (!f) {
|
2015-09-03 00:44:28 +00:00
|
|
|
D("Failed to open '%s'", file);
|
2012-08-31 19:14:21 +00:00
|
|
|
umask(old_mask);
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2012-08-31 19:14:21 +00:00
|
|
|
umask(old_mask);
|
|
|
|
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
if (!PEM_write_PrivateKey(f, pkey, NULL, NULL, 0, NULL, NULL)) {
|
2015-09-03 00:44:28 +00:00
|
|
|
D("Failed to write key");
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!write_public_keyfile(rsa, file)) {
|
2015-09-03 00:44:28 +00:00
|
|
|
D("Failed to write public key");
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = 1;
|
|
|
|
|
|
|
|
out:
|
|
|
|
if (f)
|
|
|
|
fclose(f);
|
|
|
|
EVP_PKEY_free(pkey);
|
|
|
|
RSA_free(rsa);
|
|
|
|
BN_free(exponent);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int read_key(const char *file, struct listnode *list)
|
|
|
|
{
|
2015-09-03 00:44:28 +00:00
|
|
|
D("read_key '%s'", file);
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
|
2015-05-08 02:08:29 +00:00
|
|
|
FILE* fp = fopen(file, "r");
|
2015-04-25 06:02:00 +00:00
|
|
|
if (!fp) {
|
2015-09-03 00:44:28 +00:00
|
|
|
D("Failed to open '%s': %s", file, strerror(errno));
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-04-25 06:02:00 +00:00
|
|
|
adb_private_key* key = new adb_private_key;
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
key->rsa = RSA_new();
|
|
|
|
|
2015-04-25 06:02:00 +00:00
|
|
|
if (!PEM_read_RSAPrivateKey(fp, &key->rsa, NULL, NULL)) {
|
2015-09-03 00:44:28 +00:00
|
|
|
D("Failed to read key");
|
2015-04-25 06:02:00 +00:00
|
|
|
fclose(fp);
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
RSA_free(key->rsa);
|
2015-04-25 06:02:00 +00:00
|
|
|
delete key;
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-04-25 06:02:00 +00:00
|
|
|
fclose(fp);
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
list_add_tail(list, &key->node);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
2015-07-09 20:35:09 +00:00
|
|
|
static int get_user_keyfilepath(char *filename, size_t len)
|
|
|
|
{
|
|
|
|
const char *format, *home;
|
|
|
|
char android_dir[PATH_MAX];
|
|
|
|
struct stat buf;
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
#ifdef _WIN32
|
2015-05-11 08:08:48 +00:00
|
|
|
std::string home_str;
|
2015-07-09 20:35:09 +00:00
|
|
|
home = getenv("ANDROID_SDK_HOME");
|
|
|
|
if (!home) {
|
2015-05-11 08:08:48 +00:00
|
|
|
WCHAR path[MAX_PATH];
|
2015-08-03 01:50:17 +00:00
|
|
|
const HRESULT hr = SHGetFolderPathW(NULL, CSIDL_PROFILE, NULL, 0, path);
|
|
|
|
if (FAILED(hr)) {
|
2015-09-03 00:44:28 +00:00
|
|
|
D("SHGetFolderPathW failed: %s",
|
2015-08-03 01:50:17 +00:00
|
|
|
SystemErrorCodeToString(hr).c_str());
|
2015-05-11 08:08:48 +00:00
|
|
|
return -1;
|
|
|
|
}
|
2015-11-12 23:20:15 +00:00
|
|
|
if (!android::base::WideToUTF8(path, &home_str)) {
|
|
|
|
return -1;
|
|
|
|
}
|
2015-05-11 08:08:48 +00:00
|
|
|
home = home_str.c_str();
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
}
|
2015-07-09 20:35:09 +00:00
|
|
|
format = "%s\\%s";
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
#else
|
2015-07-09 20:35:09 +00:00
|
|
|
home = getenv("HOME");
|
|
|
|
if (!home)
|
|
|
|
return -1;
|
|
|
|
format = "%s/%s";
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
#endif
|
|
|
|
|
2015-09-03 00:44:28 +00:00
|
|
|
D("home '%s'", home);
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
|
2015-07-09 20:35:09 +00:00
|
|
|
if (snprintf(android_dir, sizeof(android_dir), format, home,
|
|
|
|
ANDROID_PATH) >= (int)sizeof(android_dir))
|
|
|
|
return -1;
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
|
2015-07-09 20:35:09 +00:00
|
|
|
if (stat(android_dir, &buf)) {
|
|
|
|
if (adb_mkdir(android_dir, 0750) < 0) {
|
2015-09-03 00:44:28 +00:00
|
|
|
D("Cannot mkdir '%s'", android_dir);
|
2015-07-09 20:35:09 +00:00
|
|
|
return -1;
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-07-09 20:35:09 +00:00
|
|
|
return snprintf(filename, len, format, android_dir, ADB_KEY_FILE);
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int get_user_key(struct listnode *list)
|
|
|
|
{
|
2015-07-09 20:35:09 +00:00
|
|
|
struct stat buf;
|
|
|
|
char path[PATH_MAX];
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = get_user_keyfilepath(path, sizeof(path));
|
|
|
|
if (ret < 0 || ret >= (signed)sizeof(path)) {
|
2015-09-03 00:44:28 +00:00
|
|
|
D("Error getting user key filename");
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-09-03 00:44:28 +00:00
|
|
|
D("user key '%s'", path);
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
|
2015-07-09 20:35:09 +00:00
|
|
|
if (stat(path, &buf) == -1) {
|
|
|
|
if (!generate_key(path)) {
|
2015-09-03 00:44:28 +00:00
|
|
|
D("Failed to generate new key");
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-07-09 20:35:09 +00:00
|
|
|
return read_key(path, list);
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
}
|
|
|
|
|
2015-04-25 06:02:00 +00:00
|
|
|
static void get_vendor_keys(struct listnode* key_list) {
|
|
|
|
const char* adb_keys_path = getenv("ADB_VENDOR_KEYS");
|
|
|
|
if (adb_keys_path == nullptr) {
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
return;
|
2015-04-25 06:02:00 +00:00
|
|
|
}
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
|
2015-10-07 22:59:35 +00:00
|
|
|
for (const auto& path : android::base::Split(adb_keys_path, ENV_PATH_SEPARATOR_STR)) {
|
2015-04-25 06:02:00 +00:00
|
|
|
if (!read_key(path.c_str(), key_list)) {
|
2015-09-03 00:44:28 +00:00
|
|
|
D("Failed to read '%s'", path.c_str());
|
2015-04-25 06:02:00 +00:00
|
|
|
}
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-02-26 01:51:28 +00:00
|
|
|
int adb_auth_sign(void *node, const unsigned char* token, size_t token_size,
|
|
|
|
unsigned char* sig)
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
{
|
|
|
|
unsigned int len;
|
|
|
|
struct adb_private_key *key = node_to_item(node, struct adb_private_key, node);
|
|
|
|
|
2015-01-27 16:48:35 +00:00
|
|
|
if (token_size != TOKEN_SIZE) {
|
2015-09-03 00:44:28 +00:00
|
|
|
D("Unexpected token size %zd", token_size);
|
2015-01-27 16:48:35 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
if (!RSA_sign(NID_sha1, token, token_size, sig, &len, key->rsa)) {
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-09-03 00:44:28 +00:00
|
|
|
D("adb_auth_sign len=%d", len);
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
return (int)len;
|
|
|
|
}
|
|
|
|
|
|
|
|
void *adb_auth_nextkey(void *current)
|
|
|
|
{
|
|
|
|
struct listnode *item;
|
|
|
|
|
|
|
|
if (list_empty(&key_list))
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
if (!current)
|
|
|
|
return list_head(&key_list);
|
|
|
|
|
|
|
|
list_for_each(item, &key_list) {
|
|
|
|
if (item == current) {
|
|
|
|
/* current is the last item, we tried all the keys */
|
|
|
|
if (item->next == &key_list)
|
|
|
|
return NULL;
|
|
|
|
return item->next;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
int adb_auth_get_userkey(unsigned char *data, size_t len)
|
|
|
|
{
|
2015-07-09 20:35:09 +00:00
|
|
|
char path[PATH_MAX];
|
|
|
|
int ret = get_user_keyfilepath(path, sizeof(path) - 4);
|
|
|
|
if (ret < 0 || ret >= (signed)(sizeof(path) - 4)) {
|
2015-09-03 00:44:28 +00:00
|
|
|
D("Error getting user key filename");
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
return 0;
|
|
|
|
}
|
2015-07-09 20:35:09 +00:00
|
|
|
strcat(path, ".pub");
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
|
2015-02-26 01:51:28 +00:00
|
|
|
// TODO(danalbert): ReadFileToString
|
2015-05-23 03:09:06 +00:00
|
|
|
// Note that on Windows, load_file() does not do CR/LF translation, but
|
|
|
|
// ReadFileToString() uses the C Runtime which uses CR/LF translation by
|
|
|
|
// default (by is overridable with _setmode()).
|
2015-02-26 01:51:28 +00:00
|
|
|
unsigned size;
|
2015-07-09 20:35:09 +00:00
|
|
|
char* file_data = reinterpret_cast<char*>(load_file(path, &size));
|
2015-02-26 01:51:28 +00:00
|
|
|
if (file_data == nullptr) {
|
2015-09-03 00:44:28 +00:00
|
|
|
D("Can't load '%s'", path);
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-02-26 01:51:28 +00:00
|
|
|
if (len < (size_t)(size + 1)) {
|
2015-09-03 00:44:28 +00:00
|
|
|
D("%s: Content too large ret=%d", path, size);
|
2015-02-26 01:51:28 +00:00
|
|
|
free(file_data);
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-02-26 01:51:28 +00:00
|
|
|
memcpy(data, file_data, size);
|
|
|
|
free(file_data);
|
|
|
|
file_data = nullptr;
|
|
|
|
data[size] = '\0';
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
|
2015-02-26 01:51:28 +00:00
|
|
|
return size + 1;
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
}
|
|
|
|
|
2014-11-13 23:17:29 +00:00
|
|
|
int adb_auth_keygen(const char* filename) {
|
|
|
|
return (generate_key(filename) == 0);
|
|
|
|
}
|
|
|
|
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
void adb_auth_init(void)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
2015-09-03 00:44:28 +00:00
|
|
|
D("adb_auth_init");
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
|
|
|
|
list_init(&key_list);
|
|
|
|
|
|
|
|
ret = get_user_key(&key_list);
|
|
|
|
if (!ret) {
|
2015-09-03 00:44:28 +00:00
|
|
|
D("Failed to get user key");
|
adb: Add public key authentification
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
2012-04-12 19:23:49 +00:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
get_vendor_keys(&key_list);
|
|
|
|
}
|