android_device_qcom_common/rootdir/etc/init.qcom.debug.sh

341 lines
14 KiB
Bash

#!/system/bin/sh
# Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# * Neither the name of The Linux Foundation nor
# the names of its contributors may be used to endorse or promote
# products derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# function to enable ftrace events to CoreSight STM
enable_stm_events()
{
# bail out if its perf config
if [ ! -d /sys/module/msm_rtb ]
then
return
fi
# bail out if coresight isn't present
if [ ! -d /sys/bus/coresight ]
then
return
fi
# bail out if ftrace events aren't present
if [ ! -d /sys/kernel/debug/tracing/events ]
then
return
fi
echo 1 > /sys/bus/coresight/devices/coresight-tmc-etr/curr_sink
echo 1 > /sys/bus/coresight/devices/coresight-stm/enable
echo 1 > /sys/kernel/debug/tracing/tracing_on
echo 0 > /sys/bus/coresight/devices/coresight-stm/hwevent_enable
# timer
echo 1 > /sys/kernel/debug/tracing/events/timer/enable
echo 1 > /sys/kernel/debug/tracing/events/timer/filter
echo 1 > /sys/kernel/debug/tracing/events/timer/timer_cancel/enable
echo 1 > /sys/kernel/debug/tracing/events/timer/timer_expire_entry/enable
echo 1 > /sys/kernel/debug/tracing/events/timer/timer_expire_exit/enable
echo 1 > /sys/kernel/debug/tracing/events/timer/timer_init/enable
echo 1 > /sys/kernel/debug/tracing/events/timer/timer_start/enable
echo 1 > /sys/kernel/debug/tracing/events/timer/tick_stop/enable
echo 1 > /sys/kernel/debug/tracing/events/timer/hrtimer_cancel/enable
echo 1 > /sys/kernel/debug/tracing/events/timer/hrtimer_expire_entry/enable
echo 1 > /sys/kernel/debug/tracing/events/timer/hrtimer_expire_exit/enable
echo 1 > /sys/kernel/debug/tracing/events/timer/hrtimer_init/enable
echo 1 > /sys/kernel/debug/tracing/events/timer/hrtimer_start/enable
#enble FTRACE for softirq events
echo 1 > /sys/kernel/debug/tracing/events/irq/enable
echo 1 > /sys/kernel/debug/tracing/events/irq/filter
echo 1 > /sys/kernel/debug/tracing/events/irq/softirq_entry/enable
echo 1 > /sys/kernel/debug/tracing/events/irq/softirq_exit/enable
echo 1 > /sys/kernel/debug/tracing/events/irq/softirq_raise/enable
#enble FTRACE for Workqueue events
echo 1 > /sys/kernel/debug/tracing/events/workqueue/enable
echo 1 > /sys/kernel/debug/tracing/events/workqueue/filter
echo 1 > /sys/kernel/debug/tracing/events/workqueue/workqueue_activate_work/enable
echo 1 > /sys/kernel/debug/tracing/events/workqueue/workqueue_execute_end/enable
echo 1 > /sys/kernel/debug/tracing/events/workqueue/workqueue_execute_start/enable
echo 1 > /sys/kernel/debug/tracing/events/workqueue/workqueue_queue_work/enable
# schedular
echo 1 > /sys/kernel/debug/tracing/events/sched/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/filter
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_cpu_hotplug/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_cpu_load/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_enq_deq_task/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_kthread_stop_ret/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_kthread_stop/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_load_balance/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_migrate_task/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_pi_setprio/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_process_exec/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_process_exit/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_process_fork/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_process_free/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_process_wait/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_stat_blocked/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_stat_iowait/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_stat_runtime/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_stat_sleep/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_stat_wait/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_switch/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_task_load/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_update_history/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_update_task_ravg/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_wait_task/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_wakeup/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_wakeup_new/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_get_busy/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_get_nr_running_avg/enable
echo 1 > /sys/kernel/debug/tracing/events/sched/sched_reset_all_window_stats/enable
# sound
echo 1 > /sys/kernel/debug/tracing/events/asoc/snd_soc_reg_read/enable
echo 1 > /sys/kernel/debug/tracing/events/asoc/snd_soc_reg_write/enable
# mdp
echo 1 > /sys/kernel/debug/tracing/events/mdss/mdp_video_underrun_done/enable
# video
echo 1 > /sys/kernel/debug/tracing/events/msm_vidc/enable
# clock
echo 1 > /sys/kernel/debug/tracing/events/power/clock_set_rate/enable
# regulator
echo 1 > /sys/kernel/debug/tracing/events/regulator/enable
# power
echo 1 > /sys/kernel/debug/tracing/events/msm_low_power/enable
#thermal
echo 1 > /sys/kernel/debug/tracing/events/thermal/thermal_pre_core_offline/enable
echo 1 > /sys/kernel/debug/tracing/events/thermal/thermal_post_core_offline/enable
echo 1 > /sys/kernel/debug/tracing/events/thermal/thermal_pre_core_online/enable
echo 1 > /sys/kernel/debug/tracing/events/thermal/thermal_post_core_online/enable
echo 1 > /sys/kernel/debug/tracing/events/thermal/thermal_pre_frequency_mit/enable
echo 1 > /sys/kernel/debug/tracing/events/thermal/thermal_post_frequency_mit/enable
}
# Function MSM8996 DCC configuration
enable_msm8996_dcc_config()
{
DCC_PATH="/sys/bus/platform/devices/4b3000.dcc"
if [ ! -d $DCC_PATH ]; then
echo "DCC don't exist on this build."
return
fi
echo 0 > $DCC_PATH/enable
echo cap > $DCC_PATH/func_type
echo sram > $DCC_PATH/data_sink
echo 1 > $DCC_PATH/config_reset
#SPM Registers
# CPU0
echo 0x998000C > $DCC_PATH/config
echo 0x9980030 > $DCC_PATH/config
echo 0x998003C > $DCC_PATH/config
# CPU1
echo 0x999000C > $DCC_PATH/config
echo 0x9990030 > $DCC_PATH/config
echo 0x999003C > $DCC_PATH/config
# CPU2
echo 0x99B000C > $DCC_PATH/config
echo 0x99B0030 > $DCC_PATH/config
echo 0x99B003C > $DCC_PATH/config
# CPU3
echo 0x99C000C > $DCC_PATH/config
echo 0x99C0030 > $DCC_PATH/config
echo 0x99C003C > $DCC_PATH/config
# PWRL2
echo 0x99A000C > $DCC_PATH/config
echo 0x99A0030 > $DCC_PATH/config
echo 0x99A003C > $DCC_PATH/config
# PERFL2
echo 0x99D000C > $DCC_PATH/config
echo 0x99D0030 > $DCC_PATH/config
echo 0x99D003C > $DCC_PATH/config
# L3
echo 0x9A0000C > $DCC_PATH/config
echo 0x9A00030 > $DCC_PATH/config
echo 0x9A0003C > $DCC_PATH/config
# CBF
echo 0x9A1000C > $DCC_PATH/config
echo 0x9A10030 > $DCC_PATH/config
echo 0x9A1003C > $DCC_PATH/config
# PWR L2 HW-FLUSH
echo 0x99A1060 > $DCC_PATH/config
# PERF L2 HW-FLUSH
echo 0x99D1060 > $DCC_PATH/config
# APCS_APC0_SLEEP_EN_VOTE
echo 0x99A2030 > $DCC_PATH/config
# APCS_APCC_SW_EN_VOTE
echo 0x99E0020 > $DCC_PATH/config
# pIMEM
echo 0x0038070 > $DCC_PATH/config
echo 0x0038074 > $DCC_PATH/config
echo 0x0038078 > $DCC_PATH/config
echo 0x003807C > $DCC_PATH/config
echo 0x0038080 > $DCC_PATH/config
echo 0x0038084 > $DCC_PATH/config
echo 0x0038088 > $DCC_PATH/config
echo 0x003808C > $DCC_PATH/config
echo 1 > $DCC_PATH/enable
}
# Function MSM8976 DCC configuration
enable_msm8976_dcc_config()
{
DCC_PATH="/sys/bus/platform/devices/b3000.dcc"
if [ ! -d $DCC_PATH ]; then
echo "DCC don't exist on this build."
return
fi
echo 0 > $DCC_PATH/enable
echo cap > $DCC_PATH/func_type
echo sram > $DCC_PATH/data_sink
echo 1 > $DCC_PATH/config_reset
#BIMC_S_DDR0
echo 0x00448500 41 > $DCC_PATH/config
echo 0x0044D070 2 > $DCC_PATH/config
#BIMC_S_DDR1
echo 0x00450500 41 > $DCC_PATH/config
echo 0x00455070 2 > $DCC_PATH/config
#BMIC_M_XXX_MPORT
echo 0x00408400 30 > $DCC_PATH/config
echo 0x0040C400 30 > $DCC_PATH/config
echo 0x00410400 30 > $DCC_PATH/config
echo 0x00414400 30 > $DCC_PATH/config
echo 0x00418400 30 > $DCC_PATH/config
#APCS_ALIAS_APSS_GLB
echo 0x0B011014 2 > $DCC_PATH/config
echo 0x0B011210 1 > $DCC_PATH/config
echo 0x0B011218 1 > $DCC_PATH/config
#APCLUS1_L2_SAW2
echo 0x0B01200C 1 > $DCC_PATH/config
echo 0x0B012030 1 > $DCC_PATH/config
#APCS_ALIAS4_APSS_ACS
echo 0x0B088004 2 > $DCC_PATH/config
echo 0x0B088064 1 > $DCC_PATH/config
echo 0x0B088090 1 > $DCC_PATH/config
#APCS_ALIAS4_SAW2
echo 0x0B08900C 1 > $DCC_PATH/config
echo 0x0B089030 1 > $DCC_PATH/config
#APCS_ALIAS5_APSS_ACS
echo 0x0B098004 2 > $DCC_PATH/config
echo 0x0B098064 1 > $DCC_PATH/config
echo 0x0B098090 1 > $DCC_PATH/config
#APCS_ALIAS5_SAW2
echo 0x0B09900C 1 > $DCC_PATH/config
echo 0x0B099030 1 > $DCC_PATH/config
#APCS_ALIAS6_APSS_ACS
echo 0x0B0A8004 2 > $DCC_PATH/config
echo 0x0B0A8064 1 > $DCC_PATH/config
echo 0x0B0A8090 1 > $DCC_PATH/config
#APCS_ALIAS6_SAW2
echo 0x0B0A900C 1 > $DCC_PATH/config
echo 0x0B0A9030 1 > $DCC_PATH/config
#APCS_ALIAS7_APSS_ACS
echo 0x0B0B8004 2 > $DCC_PATH/config
echo 0x0B0B8064 1 > $DCC_PATH/config
echo 0x0B0B8090 1 > $DCC_PATH/config
#APCS_ALIAS7_SAW2
echo 0x0B0B900C 1 > $DCC_PATH/config
echo 0x0B0B9030 1 > $DCC_PATH/config
#APCS_ALIAS0_APSS_GLB
echo 0x0B111014 2 > $DCC_PATH/config
echo 0x0B111210 1 > $DCC_PATH/config
echo 0x0B111218 1 > $DCC_PATH/config
#APCLUS0_L2_SAW2
echo 0x0B11200C 1 > $DCC_PATH/config
echo 0x0B112030 1 > $DCC_PATH/config
#APCS_ALIAS0_APSS_ACS
echo 0x0B188004 2 > $DCC_PATH/config
echo 0x0B188064 1 > $DCC_PATH/config
#APCS_ALIAS0_SAW2
echo 0x0B18900C 1 > $DCC_PATH/config
echo 0x0B189030 1 > $DCC_PATH/config
#APCS_ALIAS1_APSS_ACS
echo 0x0B198004 2 > $DCC_PATH/config
echo 0x0B198064 1 > $DCC_PATH/config
#APCS_ALIAS1_SAW2
echo 0x0B19900C 1 > $DCC_PATH/config
echo 0x0B199030 1 > $DCC_PATH/config
#APCS_ALIAS2_APSS_ACS
echo 0x0B1A8004 2 > $DCC_PATH/config
echo 0x0B1A8064 1 > $DCC_PATH/config
#APCS_ALIAS2_SAW2
echo 0x0B1A900C 1 > $DCC_PATH/config
echo 0x0B1A9030 1 > $DCC_PATH/config
#APCS_ALIAS3_APSS_ACS
echo 0x0B1B8004 2 > $DCC_PATH/config
echo 0x0B1B8064 1 > $DCC_PATH/config
#APCS_ALIAS3_SAW2
echo 0x0B1B900C 1 > $DCC_PATH/config
echo 0x0B1B9030 1 > $DCC_PATH/config
#APCS_COMMON_APSS_SHARED
echo 0x0B1D1058 2 > $DCC_PATH/config
echo 0x0B1D200C 1 > $DCC_PATH/config
echo 0x0B1D2030 1 > $DCC_PATH/config
echo 1 > $DCC_PATH/enable
}
# Function DCC configuration
enable_dcc_config()
{
target=`getprop ro.board.platform`
if [ -f /sys/devices/soc0/soc_id ]; then
soc_id=`cat /sys/devices/soc0/soc_id`
else
soc_id=`cat /sys/devices/system/soc/soc0/id`
fi
case "$target" in
"msm8996")
echo "Enabling DCC config for 8996."
enable_msm8996_dcc_config
;;
"msm8952")
case "$soc_id" in
"266" | "274" | "277" | "278")
echo "Enabling DCC config for 8976."
enable_msm8976_dcc_config
;;
esac
;;
esac
}
coresight_config=`getprop persist.debug.coresight.config`
enable_dcc_config
case "$coresight_config" in
"stm-events")
echo "Enabling STM events."
enable_stm_events
;;
*)
echo "Skipping coresight configuration."
exit
;;
esac