The Audio COPP topology is hard coded to NULL topology in kernel
for incall recording stream. Remove the hard coding in kernel and
send default input device's audio calibration from audio hal
so that AUDIO_TX_MONO_COPP topology will be used for incall
recording stream.
This change is needed to be able to fine tune audio calibration
data for incall recording stream.
Change-Id: I1680731afb0c0e1c1eedbc9afd56064d856e3940
When MULTI_VOICE_SESSIONS feature flag is not enabled, the state of
incall recording stream is returned incorrectly. Fix the issue by
moving the corresponding piece of code from voice_extn.c to voice.c.
Change-Id: Id350bad65d12a4f165e80ee11cda3a8f342d38ee
Use voice_is_in_call() instead of mode == MODE_IN_CALL
as a valid indication that we are in call to choose sound
devices.
Change-Id: Iefa968ee463d4ade6c7d09626be667faab6eda98
Add support for routing voice calls to devices in other audio
HALs by allowing playback and capture to/from AFE proxy
Change-Id: I2c6a1ddec072e1d5f1a8b7ded874e9c082a7b810
Fix unused param warnings.
Take care of coding style issues.
Remove unwanted code to set acdb_settings.
Fix compilation issues on 8960 platform.
Change-Id: Ifc72472b487abee83ff85e21fd324cee938973e9
If there is any difference in the signature of a function declared
as extern, it will not be reported by the compiler and may result
in unexpected results when executed.
All the API functions should be declared in a header file.
Change-Id: I89662e23da8118c3a9eac728b389498ed52e19c2
If set parameters API called with key "tty_mode" and
MULTI_VOICE_SESSION_ENABLED flag is not enabled then tty mode is
not executed because voice_extn_set_parameters returns error(-ENOSYS).
Fix by ignore -ENOSYS return code for voice_extn_set_parameters
and voice_extn_compress_voip_set_parameters.
Change-Id: Id2308b2218fdf74e420ecbe25eeadd49756494f1
adev->voice_device_set flag is to indicate voice call
device routing update from policymanager to HAL. It is
set to true in voice_start_call and reset in update_calls()
which causes mismatch in flag update during back to back
voice calls scenario. Update adev->voice_device_set flag
in voice_stop_call instead of update_calls(). Rename
voice_device_set flag to in_call for readability.
Change-Id: Ie07105671f254899890bdb4c0635c7dc1f55dbff
- All VoIP, compress, deep buffer, record usecases need to close
before voice call setup and don't allow these usecases during
voice call on 8916.
- setMode(IN_CALL) itself is not sufficient to know if we are
in actual voice call.
- Add keyvalue parameters support to know if we are in voice call
and policy hal can query the same and make decissions based on it.
CRs-Fixed: 662804
Change-Id: I20d660fadd07c4d227a7e3dfe356fc39806ca167
- Unable to apply the mute in MT SIP call during Voice call
in CALL_HOLD.
- Mute is only applied if the voice call state is INACTIVE.
Thus when SIP call is made during Voice call in CALL_HOLD,
the mute is not being reflected.
- Fix this issue by checking voice stream type to allow
the mute to be applied.
Change-Id: I3af5225edd8e9a4123867b647de9405d5c4b9efc
CRs-Fixed: 642893
Remove update_mixer (as its unused) and change function signatures
wherever used.
Remove code chunk to set BT sample rate before enabling device as
thats part of the mixer path file now.
Change-Id: I5eb3bce5183acf505596be2b0ec93cdbd728bdaa
CRs-Fixed: 581453
Update devices for Voice2, VoLTE and QCHAT sessions
based on the TTY mode. This change is needed to support
enabling/disabling and switching TTY mode during
voice call.
Change-Id: I4f1fde8ce6b20fad0d24e0cd963e2c3709ff25d5
CRs-fixed: 608183
There are specific xml files used for I2S based external modem.
Add check to load the correct xml file.
For I2S based external modem, voice sample rate can be 8k or
16k based on vocoder type. Call csd client api to get the
correct sample rate to configure voice call.
Change-Id: Ie9799336620f49a890355be74fe1830eb348cabe
String returned from str_parms_to_str for set/get parameter in
debug logs is not de-allocated. Fix is to make sure the memory
allocated for set parameter key value pair is de-allocated.
CRs-Fixed: 610079
Change-Id: I5027d8f1741c9e7223e7b4721f8d5473404998d3
HAL doesnt let voice calls start if the device is set to speaker
as voice calls generally start on devices other than speaker.
However QCHAT calls start by calling setForceUse and setting the
device to speaker.
Fix by updating a flag whenever device routing happens when
AUDIO_MODE_IN_CALL. Reset the flag when mode is AUDIO_MODE_NORMAL.
CRs-fixed: 596074
Change-Id: I546959d2b0123828562dba1f6439aa494a365c3f
When setparameters() is called and if the known keys are not found,
the implementation returns -2 error.Fix this by setting error only
when keys are found and there is an error while executing corresponding
implemention.
CRs-fixed: 589280
Change-Id: If5544d6fdeac47ddfc1f7e8e18bfa81e2ef5cbc2
- HAL always assumed SOUND_CARD/MIXER_CARD
number to be zero. This could cause HAL
not to load when some other card is
detected earlier to HAL.
- Fix by removing these Macro(s) and reading
correct sound card number runtime while loading
- Corrected its use cases across HAL replacing it
with appropriate platform API
CRs-fixed: 580226
Change-Id: I4512e4a2f7f81d8415c3ba8ec393c96867e6d69a
Currently, AMR WB recording uses tunnel mode instead of
software encoding. Update audio hal to use compress audio
path to do incall recording with AMR WB format.
Change-Id: I93deb3dbc7dcd6a8d2b178334f8b43117ee6841c
CRs-Fixed: 581298
-In-call recording feature support is added in APQ.
-In-call music delivery support is added in APQ.
Change-Id: Id473eac87da33f1f566b6910ec1feadcd3f08317
Listen needs be stopped when audio capture is active. Also
Listen needs to be started again after audio capture becomes
inactive. Stop and start listen based on audio capture device.
Change-Id: I05ca7cccd59b43a163604881bd9c6ee10cc8fba3
Depends-on: 510494
Select AMR-WB and start incall recording, the audio quality is bad.
The root cause is that the sample rate is set to 8k not 16k for AMR-WB.
Use audio record configure instead of voice configure for incall recording.
Change-Id: Ib71e0e8d1f2c5eb72db3260110e55179e415fa26
CRs-Fixed: 576412
APQ8084 uses external modem to make voice calls.
APQ uses CSD QMI interface to communicate with external
modem. Add csd client apis to support voice calls
Change-Id: I11fe0cc614ee38c42e95b40d5cd5e2d8b3afd43a
Telephony will call set_mode(AUDIO_MODE_NORMAL) when a
call is ended which will trigger audio policy manager setting
routing with audio usecase compatible device. Voice calls can
still be active if RIL has not yet called
setparameters(vsid,callstate). This would result in routing
voice call usecases with incompatible device for voice calls.
Fix this by ending all voice calls when set_mode(MODE_NORMAL)
is called.
Change-Id: Id2c9f2ff9ed46969e5cbd27b525b81735c1d49d8
- Most of the targets supports multiple hardware variants such as
MTP, CDP, Fluid, Liquid etc. The mixer paths for certain devices
may vary on some of the variants. For example, the mixer controls
for speaker device are different on msm8974 MTP and Fluid variants.
- Update audio HAL to select corresponding entry in the
mixer_paths.xml file based on HW information.
Change-Id: I060f2e6c331344dd41417c19fb688ff27a129308
Conflicts:
hal/Android.mk
In multisim scenarios, local call hold tone has to be played
to the uplink on the sub on local call hold. Add incall music
delivery feature so that call hold tones can be played to the
uplink.
Change-Id: I8cecf0139926a4bfee603c02542bbedc67720bf4
audio/hal: Configure HDMI channels based on output stream channels
hal: Fix for Tx Mute issue when a new call accepted while in call
Level measurement in offloaded visualizer
audio: Presentation time enhancements
implement get_presentation_position() for offloaded outputs
audio : add new TMUS MCC and MNC list
audio : add new TMUS MCC and MNC list
audio : add new TMUS MCC and MNC list
add offloaded audio visualizer
audio: compress offload enhancements
audio: enable AAC offload
audio: set cached volume before starting voice call
audio: set cached volume before starting voice call
Implement HAL API get_presentation_position
hal: force stop after drain.
hal: Add support for Tunnel mode audio playback
Conflicts:
Android.mk
hal/audio_hw.c
hal/audio_hw.h
hal/msm8960/platform.c
hal/msm8974/platform.c
Change-Id: I0c66fd6bae9b4974e1791f4e848c775d389da3d0
The uplink, downlink and the combination of both can be
recorded using sound recorder app. Add support for incall
recording feature in audio HAL.
Change-Id: Ia828ab5b3af8044d82b6ef8eb989ae0ba9bbba16
Update HAL to add multi SIM voice support. Seperate
out voice features to voice files.
Add getprop/setprop for BT sample rate, Fluence and Slow talk.
Change-Id: Ief61466f78c7b915549981a28fc7ff32731607a5
Narsinga Rao Chella
Ravi Kumar Alamanda
Linux Build Service Account
Vidyakumar Athota
Haynes Mathew George
Venkata Narendra Kumar Gutta
kunleiz
Helen Zeng
Krishnankutty Kolathappilly
Shiv Maliyappanahalli
Apoorv Raghuvanshi
Kiran Kandi
Shruthi Krishna