hal: add audio specific config files for msmcobalt

Create a new folder and add audio specific config files
for MSMCOBALT target.

Change-Id: I9df890a79d3fbe5020e846ecd7569cf0598924d8
This commit is contained in:
Banajit Goswami 2016-04-07 01:56:17 -07:00
parent 38b600fd1f
commit 8b11ffefab
15 changed files with 8516 additions and 0 deletions

View File

@ -0,0 +1,143 @@
#ANC_TEST_P_PATH_MIC_STEREO Capture
acdb_dev_id:85
!Capture
Txdevice:0
enable
AIF1_CAP Mixer SLIM TX7:1
AIF1_CAP Mixer SLIM TX8:1
SLIM TX7 MUX:DEC7
ADC MUX7:DMIC
DMIC MUX7:DMIC3
SLIM TX8 MUX:DEC8
ADC MUX8:DMIC
DMIC MUX8:DMIC2
SLIM_0_TX Channels:Two
MultiMedia1 Mixer SLIM_0_TX:1
disable
MultiMedia1 Mixer SLIM_0_TX:0
AIF1_CAP Mixer SLIM TX7:0
AIF1_CAP Mixer SLIM TX8:0
SLIM TX7 MUX:ZERO
SLIM TX8 MUX:ZERO
DMIC MUX7:ZERO
DMIC MUX8:ZERO
#ANC_TEST_S_PATH_MIC_STEREO Capture
acdb_dev_id:88
!Capture
Txdevice:0
enable
AIF1_CAP Mixer SLIM TX7:1
AIF1_CAP Mixer SLIM TX8:1
SLIM TX7 MUX:DEC7
ADC MUX7:ANC_FB_TUNE1
ADC MUX10:DMIC
DMIC MUX10:DMIC2
SLIM TX8 MUX:DEC8
ADC MUX8:ANC_FB_TUNE2
ADC MUX12:DMIC
DMIC MUX12:DMIC2
ANC0 FB MUX:ANC_IN_EAR
ANC EAR Enable Switch:1
SLIM_0_TX Channels:Two
MultiMedia1 Mixer SLIM_0_TX:1
disable
MultiMedia1 Mixer SLIM_0_TX:0
AIF1_CAP Mixer SLIM TX7:0
AIF1_CAP Mixer SLIM TX8:0
SLIM TX7 MUX:ZERO
SLIM TX8 MUX:ZERO
ADC MUX7:DMIC
ADC MUX8:DMIC
DMIC MUX10:ZERO
DMIC MUX12:ZERO
ANC0 FB MUX:ZERO
ANC EAR Enable Switch:0
#ANC_TEST_E_PATH_MIC_STEREO Capture
acdb_dev_id:91
!Capture
Txdevice:0
enable
AIF1_CAP Mixer SLIM TX7:1
AIF1_CAP Mixer SLIM TX8:1
SLIM TX7 MUX:DEC7
ADC MUX7:ANC_FB_TUNE1
ADC MUX10:DMIC
DMIC MUX10:DMIC3
SLIM TX8 MUX:DEC8
ADC MUX8:ANC_FB_TUNE2
ADC MUX12:DMIC
DMIC MUX12:DMIC3
ANC0 FB MUX:ANC_IN_EAR
ANC EAR Enable Switch:1
SLIM_0_TX Channels:Two
MultiMedia1 Mixer SLIM_0_TX:1
disable
MultiMedia1 Mixer SLIM_0_TX:0
AIF1_CAP Mixer SLIM TX7:0
AIF1_CAP Mixer SLIM TX8:0
SLIM TX7 MUX:ZERO
SLIM TX8 MUX:ZERO
ADC MUX7:DMIC
ADC MUX8:DMIC
DMIC MUX10:ZERO
DMIC MUX12:ZERO
ANC0 FB MUX:ZERO
ANC EAR Enable Switch:0
#ANC_TEST_S_PATH_HANDSET_SPKR_ANC_MONO
acdb_dev_id:86
!Playback
Rxdevice:0
enable
ANC Function:ON
SLIM RX0 MUX:AIF_MIX1_PB
SLIM_0_RX Channels:One
RX INT0_1 MIX1 INP0:RX0
RX INT0 DEM MUX:CLSH_DSM_OUT
RX0 Digital Volume:87
ANC Slot:7
EAR PA Gain:G_6_DB
SLIMBUS_0_RX Audio Mixer MultiMedia1:1
disable
SLIMBUS_0_RX Audio Mixer MultiMedia1:0
ANC Slot:0
SLIM RX0 MUX:ZERO
RX INT0_1 MIX1 INP0:ZERO
RX0 Digital Volume:0
ANC Function:OFF
#ANC_TEST_E_PATH_HANDSET_SPKR_ANC_MONO
acdb_dev_id:89
!Playback
Rxdevice:0
enable
ANC Function:ON
SLIM RX0 MUX:AIF_MIX1_PB
SLIM_0_RX Channels:One
RX INT0_1 MIX1 INP0:RX0
RX INT0 DEM MUX:CLSH_DSM_OUT
RX0 Digital Volume:87
ANC Slot:8
EAR PA Gain:G_6_DB
SLIMBUS_0_RX Audio Mixer MultiMedia1:1
disable
SLIMBUS_0_RX Audio Mixer MultiMedia1:0
ANC Slot:0
SLIM RX0 MUX:ZERO
RX INT0_1 MIX1 INP0:ZERO
RX0 Digital Volume:0
ANC Function:OFF

View File

@ -0,0 +1,349 @@
# List of effect libraries to load. Each library element must contain a "path" element
# giving the full path of the library .so file.
# libraries {
# <lib name> {
# path <lib path>
# }
# }
libraries {
bundle {
path /system/lib/soundfx/libbundlewrapper.so
}
reverb {
path /system/lib/soundfx/libreverbwrapper.so
}
qcbassboost {
path /vendor/lib/soundfx/libqcbassboost.so
}
qcvirt {
path /vendor/lib/soundfx/libqcvirt.so
}
qcreverb {
path /vendor/lib/soundfx/libqcreverb.so
}
visualizer_sw {
path /system/lib/soundfx/libvisualizer.so
}
visualizer_hw {
path /system/lib/soundfx/libqcomvisualizer.so
}
downmix {
path /system/lib/soundfx/libdownmix.so
}
loudness_enhancer {
path /system/lib/soundfx/libldnhncr.so
}
proxy {
path /system/lib/soundfx/libeffectproxy.so
}
offload_bundle {
path /system/lib/soundfx/libqcompostprocbundle.so
}
audio_pre_processing {
path /system/lib/soundfx/libqcomvoiceprocessing.so
}
loudness_enhancer {
path /system/lib/soundfx/libldnhncr.so
}
volume_listener {
path /system/lib/soundfx/libvolumelistener.so
}
}
# Default pre-processing library. Add to audio_effect.conf "libraries" section if
# audio HAL implements support for default software audio pre-processing effects
#
# pre_processing {
# path /system/lib/soundfx/libaudiopreprocessing.so
# }
# list of effects to load. Each effect element must contain a "library" and a "uuid" element.
# The value of the "library" element must correspond to the name of one library element in the
# "libraries" element.
# The name of the effect element is indicative, only the value of the "uuid" element
# designates the effect.
# The uuid is the implementation specific UUID as specified by the effect vendor. This is not the
# generic effect type UUID.
# effects {
# <fx name> {
# library <lib name>
# uuid <effect uuid>
# }
# ...
# }
effects {
# additions for the proxy implementation
# Proxy implementation
#effectname {
#library proxy
#uuid xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
# SW implemetation of the effect. Added as a node under the proxy to
# indicate this as a sub effect.
#libsw {
#library libSW
#uuid yyyyyyyy-yyyy-yyyy-yyyy-yyyyyyyyyyyy
#} End of SW effect
# HW implementation of the effect. Added as a node under the proxy to
# indicate this as a sub effect.
#libhw {
#library libHW
#uuid zzzzzzzz-zzzz-zzzz-zzzz-zzzzzzzzzzzz
#}End of HW effect
#} End of effect proxy
bassboost {
library proxy
uuid 14804144-a5ee-4d24-aa88-0002a5d5c51b
libsw {
library qcbassboost
uuid 23aca180-44bd-11e2-bcfd-0800200c9a66
}
libhw {
library offload_bundle
uuid 2c4a8c24-1581-487f-94f6-0002a5d5c51b
}
}
virtualizer {
library proxy
uuid d3467faa-acc7-4d34-acaf-0002a5d5c51b
libsw {
library qcvirt
uuid e6c98a16-22a3-11e2-b87b-f23c91aec05e
}
libhw {
library offload_bundle
uuid 509a4498-561a-4bea-b3b1-0002a5d5c51b
}
}
equalizer {
library proxy
uuid c8e70ecd-48ca-456e-8a4f-0002a5d5c51b
libsw {
library bundle
uuid ce772f20-847d-11df-bb17-0002a5d5c51b
}
libhw {
library offload_bundle
uuid a0dac280-401c-11e3-9379-0002a5d5c51b
}
}
volume {
library bundle
uuid 119341a0-8469-11df-81f9-0002a5d5c51b
}
reverb_env_aux {
library proxy
uuid 48404ac9-d202-4ccc-bf84-0002a5d5c51b
libsw {
library qcreverb
uuid a8c1e5f3-293d-43cd-95ec-d5e26c02e217
}
libhw {
library offload_bundle
uuid 79a18026-18fd-4185-8233-0002a5d5c51b
}
}
reverb_env_ins {
library proxy
uuid b707403a-a1c1-4291-9573-0002a5d5c51b
libsw {
library qcreverb
uuid 791fff8b-8129-4655-83a4-59bc61034c3a
}
libhw {
library offload_bundle
uuid eb64ea04-973b-43d2-8f5e-0002a5d5c51b
}
}
reverb_pre_aux {
library proxy
uuid 1b78f587-6d1c-422e-8b84-0002a5d5c51b
libsw {
library qcreverb
uuid 53ef1db5-c0c0-445b-b060-e34d20ebb70a
}
libhw {
library offload_bundle
uuid 6987be09-b142-4b41-9056-0002a5d5c51b
}
}
reverb_pre_ins {
library proxy
uuid f3e178d2-ebcb-408e-8357-0002a5d5c51b
libsw {
library qcreverb
uuid b08a0e38-22a5-11e2-b87b-f23c91aec05e
}
libhw {
library offload_bundle
uuid aa2bebf6-47cf-4613-9bca-0002a5d5c51b
}
}
visualizer {
library proxy
uuid 1d0a1a53-7d5d-48f2-8e71-27fbd10d842c
libsw {
library visualizer_sw
uuid d069d9e0-8329-11df-9168-0002a5d5c51b
}
libhw {
library visualizer_hw
uuid 7a8044a0-1a71-11e3-a184-0002a5d5c51b
}
}
downmix {
library downmix
uuid 93f04452-e4fe-41cc-91f9-e475b6d1d69f
}
hw_acc {
library offload_bundle
uuid 7d1580bd-297f-4683-9239-e475b6d1d69f
}
loudness_enhancer {
library loudness_enhancer
uuid fa415329-2034-4bea-b5dc-5b381c8d1e2c
}
aec {
library audio_pre_processing
uuid 0f8d0d2a-59e5-45fe-b6e4-248c8a799109
}
ns {
library audio_pre_processing
uuid 1d97bb0b-9e2f-4403-9ae3-58c2554306f8
}
music_helper {
library volume_listener
uuid 08b8b058-0590-11e5-ac71-0025b32654a0
}
ring_helper {
library volume_listener
uuid 0956df94-0590-11e5-bdbe-0025b32654a0
}
alarm_helper {
library volume_listener
uuid 09f303e2-0590-11e5-8fdb-0025b32654a0
}
# voice_helper is called when stream type is voice_call in VoIP usecase
voice_helper {
library volume_listener
uuid 0ace5c08-0590-11e5-ae9e-0025b32654a0
}
notification_helper {
library volume_listener
uuid 0b776dde-0590-11e5-81ba-0025b32654a0
}
}
# additional effect from vendor
# UUID generated using version 1
output_session_processing {
music {
music_helper {
}
}
ring {
ring_helper {
}
}
alarm {
alarm_helper {
}
}
# stream type voice_call is used for VoIP call
voice_call {
voice_helper {
}
}
notification {
notification_helper {
}
}
}
# Added aec, ns effects for voice_communication, which are supported by the board
pre_processing {
voice_communication {
aec {
}
ns {
}
}
}
# Default pre-processing effects. Add to audio_effect.conf "effects" section if
# audio HAL implements support for them.
#
# agc {
# library pre_processing
# uuid aa8130e0-66fc-11e0-bad0-0002a5d5c51b
# }
# aec {
# library pre_processing
# uuid bb392ec0-8d4d-11e0-a896-0002a5d5c51b
# }
# ns {
# library pre_processing
# uuid c06c8400-8e06-11e0-9cb6-0002a5d5c51b
# }
# Audio preprocessor configurations.
# The pre processor configuration consists in a list of elements each describing
# pre processor settings for a given input source. Valid input source names are:
# "mic", "camcorder", "voice_recognition", "voice_communication"
# Each input source element contains a list of effects elements. The name of the effect
# element must be the name of one of the effects in the "effects" list of the file.
# Each effect element may optionally contain a list of parameters and their
# default value to apply when the pre processor effect is created.
# A parameter is defined by a "param" element and a "value" element. Each of these elements
# consists in one or more elements specifying a type followed by a value.
# The types defined are: "int", "short", "float", "bool" and "string"
# When both "param" and "value" are a single int, a simple form is allowed where just
# the param and value pair is present in the parameter description
# pre_processing {
# <input source name> {
# <fx name> {
# <param 1 name> {
# param {
# int|short|float|bool|string <value>
# [ int|short|float|bool|string <value> ]
# ...
# }
# value {
# int|short|float|bool|string <value>
# [ int|short|float|bool|string <value> ]
# ...
# }
# }
# <param 2 name > {<param> <value>}
# ...
# }
# ...
# }
# ...
# }
#
# TODO: add default audio pre processor configurations after debug and tuning phase
#

View File

@ -0,0 +1,56 @@
# List of profiles for the output device session where stream is routed.
# A stream opened with the inputs attributes which match the "flags" and
# "formats" as specified in the profile is routed to a device at
# sample rate specified under "sampling_rates" and bit width under
# "bit_width" and the topology extracted from the acdb data against
# the "app_type".
#
# the flags and formats are specified using the strings corresponding to
# enums in audio.h and audio_policy.h. They are concatenated with "|"
# without space or "\n".
# the flags and formats should match the ones in "audio_policy.conf"
outputs {
default {
flags AUDIO_OUTPUT_FLAG_PRIMARY
formats AUDIO_FORMAT_PCM_16_BIT
sampling_rates 48000
bit_width 16
app_type 69937
}
deep_buffer {
flags AUDIO_OUTPUT_FLAG_DEEP_BUFFER
formats AUDIO_FORMAT_PCM_16_BIT
sampling_rates 48000
bit_width 16
app_type 69936
}
direct {
flags AUDIO_OUTPUT_FLAG_DIRECT
formats AUDIO_FORMAT_PCM_16_BIT
sampling_rates 48000
bit_width 16
app_type 69936
}
direct_pcm {
flags AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_DIRECT_PCM
formats AUDIO_FORMAT_PCM_16_BIT
sampling_rates 44100|48000|96000|192000
bit_width 16
app_type 69936
}
compress_offload_16 {
flags AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING
formats AUDIO_FORMAT_MP3|AUDIO_FORMAT_PCM_16_BIT_OFFLOAD|AUDIO_FORMAT_PCM_24_BIT_OFFLOAD|AUDIO_FORMAT_FLAC|AUDIO_FORMAT_ALAC|AUDIO_FORMAT_APE|AUDIO_FORMAT_AAC_LC|AUDIO_FORMAT_AAC_HE_V1|AUDIO_FORMAT_AAC_HE_V2|AUDIO_FORMAT_WMA|AUDIO_FORMAT_WMA_PRO|AUDIO_FORMAT_VORBIS|AUDIO_FORMAT_AAC_ADTS_LC|AUDIO_FORMAT_AAC_ADTS_HE_V1|AUDIO_FORMAT_AAC_ADTS_HE_V2
sampling_rates 44100|48000
bit_width 16
app_type 69936
}
compress_offload_24 {
flags AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING
formats AUDIO_FORMAT_PCM_24_BIT_OFFLOAD|AUDIO_FORMAT_FLAC|AUDIO_FORMAT_ALAC|AUDIO_FORMAT_APE|AUDIO_FORMAT_VORBIS|AUDIO_FORMAT_WMA|AUDIO_FORMAT_WMA_PRO
sampling_rates 44100|48000|96000|192000
bit_width 24
app_type 69940
}
}

View File

@ -0,0 +1,43 @@
<?xml version="1.0" encoding="ISO-8859-1"?>
<!-- Copyright (c) 2014, 2016, The Linux Foundation. All rights reserved. -->
<!-- -->
<!-- Redistribution and use in source and binary forms, with or without -->
<!-- modification, are permitted provided that the following conditions are -->
<!-- met: -->
<!-- * Redistributions of source code must retain the above copyright -->
<!-- notice, this list of conditions and the following disclaimer. -->
<!-- * Redistributions in binary form must reproduce the above -->
<!-- copyright notice, this list of conditions and the following -->
<!-- disclaimer in the documentation and/or other materials provided -->
<!-- with the distribution. -->
<!-- * Neither the name of The Linux Foundation nor the names of its -->
<!-- contributors may be used to endorse or promote products derived -->
<!-- from this software without specific prior written permission. -->
<!-- -->
<!-- THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -->
<!-- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -->
<!-- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -->
<!-- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -->
<!-- BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -->
<!-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -->
<!-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -->
<!-- BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -->
<!-- OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -->
<!-- IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -->
<audio_platform_info>
<acdb_ids>
<device name="SND_DEVICE_OUT_SPEAKER" acdb_id="15"/>
<device name="SND_DEVICE_OUT_SPEAKER_PROTECTED" acdb_id="124"/>
</acdb_ids>
<bit_width_configs>
<device name="SND_DEVICE_OUT_SPEAKER" bit_width="24"/>
</bit_width_configs>
<config_params>
<param key="spkr_1_tz_name" value="wsatz.11"/>
<param key="spkr_2_tz_name" value="wsatz.12"/>
<!-- In the below value string, first parameter indicates size -->
<!-- followed by perf lock options -->
<param key="perf_lock_opts" value="4, 0x101, 0x704, 0x20F, 0x1E01"/>
</config_params>
</audio_platform_info>

View File

@ -0,0 +1,35 @@
<?xml version="1.0" encoding="ISO-8859-1"?>
<!-- Copyright (c) 2014, 2016, The Linux Foundation. All rights reserved. -->
<!-- -->
<!-- Redistribution and use in source and binary forms, with or without -->
<!-- modification, are permitted provided that the following conditions are -->
<!-- met: -->
<!-- * Redistributions of source code must retain the above copyright -->
<!-- notice, this list of conditions and the following disclaimer. -->
<!-- * Redistributions in binary form must reproduce the above -->
<!-- copyright notice, this list of conditions and the following -->
<!-- disclaimer in the documentation and/or other materials provided -->
<!-- with the distribution. -->
<!-- * Neither the name of The Linux Foundation nor the names of its -->
<!-- contributors may be used to endorse or promote products derived -->
<!-- from this software without specific prior written permission. -->
<!-- -->
<!-- THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -->
<!-- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -->
<!-- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -->
<!-- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -->
<!-- BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -->
<!-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -->
<!-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -->
<!-- BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -->
<!-- OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -->
<!-- IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -->
<audio_platform_info_i2s>
<device name="SND_DEVICE_IN_HANDSET_MIC" acdb_id="8" />
<device name="SND_DEVICE_IN_SPEAKER_MIC" acdb_id="8" />
<device name="SND_DEVICE_IN_VOICE_SPEAKER_MIC" acdb_id="8" />
<device name="SND_DEVICE_OUT_HANDSET" acdb_id="10" />
<device name="SND_DEVICE_OUT_VOICE_HANDSET" acdb_id="10" />
<device name="SND_DEVICE_OUT_SPEAKER" acdb_id="10" />
<device name="SND_DEVICE_OUT_VOICE_SPEAKER" acdb_id="10" />
</audio_platform_info_i2s>

View File

@ -0,0 +1,169 @@
# Global configuration section: lists input and output devices always present on the device
# as well as the output device selected by default.
# Devices are designated by a string that corresponds to the enum in audio.h
global_configuration {
attached_output_devices AUDIO_DEVICE_OUT_EARPIECE|AUDIO_DEVICE_OUT_SPEAKER|AUDIO_DEVICE_OUT_TELEPHONY_TX
default_output_device AUDIO_DEVICE_OUT_SPEAKER
attached_input_devices AUDIO_DEVICE_IN_BUILTIN_MIC|AUDIO_DEVICE_IN_BACK_MIC|AUDIO_DEVICE_IN_REMOTE_SUBMIX|AUDIO_DEVICE_IN_VOICE_CALL|AUDIO_DEVICE_IN_TELEPHONY_RX|AUDIO_DEVICE_IN_FM_TUNER
}
# audio hardware module section: contains descriptors for all audio hw modules present on the
# device. Each hw module node is named after the corresponding hw module library base name.
# For instance, "primary" corresponds to audio.primary.<device>.so.
# The "primary" module is mandatory and must include at least one output with
# AUDIO_OUTPUT_FLAG_PRIMARY flag.
# Each module descriptor contains one or more output profile descriptors and zero or more
# input profile descriptors. Each profile lists all the parameters supported by a given output
# or input stream category.
# The "channel_masks", "formats", "devices" and "flags" are specified using strings corresponding
# to enums in audio.h and audio_policy.h. They are concatenated by use of "|" without space or "\n".
audio_hw_modules {
primary {
outputs {
primary {
sampling_rates 44100|48000
channel_masks AUDIO_CHANNEL_OUT_STEREO
formats AUDIO_FORMAT_PCM_16_BIT
devices AUDIO_DEVICE_OUT_EARPIECE|AUDIO_DEVICE_OUT_SPEAKER|AUDIO_DEVICE_OUT_WIRED_HEADSET|AUDIO_DEVICE_OUT_WIRED_HEADPHONE|AUDIO_DEVICE_OUT_LINE|AUDIO_DEVICE_OUT_ALL_SCO|AUDIO_DEVICE_OUT_AUX_DIGITAL|AUDIO_DEVICE_OUT_PROXY|AUDIO_DEVICE_OUT_FM
flags AUDIO_OUTPUT_FLAG_FAST|AUDIO_OUTPUT_FLAG_PRIMARY
}
raw {
sampling_rates 48000
channel_masks AUDIO_CHANNEL_OUT_STEREO
formats AUDIO_FORMAT_PCM_16_BIT
devices AUDIO_DEVICE_OUT_EARPIECE|AUDIO_DEVICE_OUT_SPEAKER|AUDIO_DEVICE_OUT_WIRED_HEADSET|AUDIO_DEVICE_OUT_WIRED_HEADPHONE|AUDIO_DEVICE_OUT_LINE|AUDIO_DEVICE_OUT_ALL_SCO|AUDIO_DEVICE_OUT_AUX_DIGITAL|AUDIO_DEVICE_OUT_PROXY
flags AUDIO_OUTPUT_FLAG_FAST|AUDIO_OUTPUT_FLAG_RAW
}
deep_buffer {
sampling_rates 44100|48000
channel_masks AUDIO_CHANNEL_OUT_STEREO
formats AUDIO_FORMAT_PCM_16_BIT
devices AUDIO_DEVICE_OUT_SPEAKER|AUDIO_DEVICE_OUT_EARPIECE|AUDIO_DEVICE_OUT_WIRED_HEADSET|AUDIO_DEVICE_OUT_WIRED_HEADPHONE|AUDIO_DEVICE_OUT_LINE|AUDIO_DEVICE_OUT_ALL_SCO|AUDIO_DEVICE_OUT_AUX_DIGITAL|AUDIO_DEVICE_OUT_PROXY|AUDIO_DEVICE_OUT_FM
flags AUDIO_OUTPUT_FLAG_DEEP_BUFFER
}
multichannel {
sampling_rates 8000|11025|16000|22050|32000|44100|48000|64000|88200|96000|128000|176400|192000
channel_masks dynamic
formats AUDIO_FORMAT_PCM_16_BIT
devices AUDIO_DEVICE_OUT_AUX_DIGITAL|AUDIO_DEVICE_OUT_PROXY
flags AUDIO_OUTPUT_FLAG_DIRECT
}
direct_pcm {
sampling_rates 44100|48000|64000|88200|96000|176400|192000
channel_masks AUDIO_CHANNEL_OUT_MONO|AUDIO_CHANNEL_OUT_STEREO|AUDIO_CHANNEL_OUT_2POINT1|AUDIO_CHANNEL_OUT_QUAD|AUDIO_CHANNEL_OUT_PENTA|AUDIO_CHANNEL_OUT_5POINT1|AUDIO_CHANNEL_OUT_6POINT1|AUDIO_CHANNEL_OUT_7POINT1
formats AUDIO_FORMAT_PCM_16_BIT
devices AUDIO_DEVICE_OUT_SPEAKER|AUDIO_DEVICE_OUT_EARPIECE|AUDIO_DEVICE_OUT_WIRED_HEADSET|AUDIO_DEVICE_OUT_WIRED_HEADPHONE|AUDIO_DEVICE_OUT_LINE|AUDIO_DEVICE_OUT_ALL_SCO|AUDIO_DEVICE_OUT_PROXY
flags AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_DIRECT_PCM
}
compress_offload {
sampling_rates 8000|11025|12000|16000|22050|24000|32000|44100|48000|64000|88200|96000|176400|192000
channel_masks AUDIO_CHANNEL_OUT_MONO|AUDIO_CHANNEL_OUT_STEREO|AUDIO_CHANNEL_OUT_2POINT1|AUDIO_CHANNEL_OUT_QUAD|AUDIO_CHANNEL_OUT_PENTA|AUDIO_CHANNEL_OUT_5POINT1|AUDIO_CHANNEL_OUT_6POINT1|AUDIO_CHANNEL_OUT_7POINT1
formats AUDIO_FORMAT_MP3|AUDIO_FORMAT_PCM_16_BIT_OFFLOAD|AUDIO_FORMAT_PCM_24_BIT_OFFLOAD|AUDIO_FORMAT_FLAC|AUDIO_FORMAT_ALAC|AUDIO_FORMAT_APE|AUDIO_FORMAT_AAC_LC|AUDIO_FORMAT_AAC_HE_V1|AUDIO_FORMAT_AAC_HE_V2|AUDIO_FORMAT_WMA|AUDIO_FORMAT_WMA_PRO|AUDIO_FORMAT_VORBIS|AUDIO_FORMAT_AAC_ADTS_LC|AUDIO_FORMAT_AAC_ADTS_HE_V1|AUDIO_FORMAT_AAC_ADTS_HE_V2
devices AUDIO_DEVICE_OUT_SPEAKER|AUDIO_DEVICE_OUT_EARPIECE|AUDIO_DEVICE_OUT_WIRED_HEADSET|AUDIO_DEVICE_OUT_WIRED_HEADPHONE|AUDIO_DEVICE_OUT_LINE|AUDIO_DEVICE_OUT_ALL_SCO|AUDIO_DEVICE_OUT_AUX_DIGITAL|AUDIO_DEVICE_OUT_PROXY
flags AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING
}
incall_music {
sampling_rates 8000|16000|48000
channel_masks AUDIO_CHANNEL_OUT_MONO
formats AUDIO_FORMAT_PCM_16_BIT
devices AUDIO_DEVICE_OUT_SPEAKER|AUDIO_DEVICE_OUT_EARPIECE|AUDIO_DEVICE_OUT_WIRED_HEADSET|AUDIO_DEVICE_OUT_WIRED_HEADPHONE|AUDIO_DEVICE_OUT_LINE|AUDIO_DEVICE_OUT_ALL_SCO
flags AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_INCALL_MUSIC
}
voice_tx {
sampling_rates 8000|16000|48000
channel_masks AUDIO_CHANNEL_OUT_STEREO|AUDIO_CHANNEL_OUT_MONO
formats AUDIO_FORMAT_PCM_16_BIT
devices AUDIO_DEVICE_OUT_TELEPHONY_TX
}
voip_rx {
sampling_rates 8000|16000
channel_masks AUDIO_CHANNEL_OUT_MONO
formats AUDIO_FORMAT_PCM_16_BIT|AUDIO_FORMAT_AMR_NB|AUDIO_FORMAT_AMR_WB|AUDIO_FORMAT_QCELP|AUDIO_FORMAT_EVRC|AUDIO_FORMAT_EVRCB|AUDIO_FORMAT_EVRCWB|AUDIO_FORMAT_EVRCNW
devices AUDIO_DEVICE_OUT_SPEAKER|AUDIO_DEVICE_OUT_EARPIECE|AUDIO_DEVICE_OUT_WIRED_HEADSET|AUDIO_DEVICE_OUT_WIRED_HEADPHONE|AUDIO_DEVICE_OUT_LINE|AUDIO_DEVICE_OUT_ALL_SCO
flags AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_VOIP_RX
}
}
inputs {
primary {
sampling_rates 8000|11025|12000|16000|22050|24000|32000|44100|48000
channel_masks AUDIO_CHANNEL_IN_MONO|AUDIO_CHANNEL_IN_STEREO|AUDIO_CHANNEL_IN_FRONT_BACK
formats AUDIO_FORMAT_PCM_16_BIT|AUDIO_FORMAT_AMR_NB|AUDIO_FORMAT_AMR_WB|AUDIO_FORMAT_QCELP|AUDIO_FORMAT_EVRC|AUDIO_FORMAT_EVRCB|AUDIO_FORMAT_EVRCWB|AUDIO_FORMAT_EVRCNW
devices AUDIO_DEVICE_IN_WIRED_HEADSET|AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET|AUDIO_DEVICE_IN_FM_TUNER|AUDIO_DEVICE_IN_VOICE_CALL
}
surround_sound {
sampling_rates 8000|11025|12000|16000|22050|24000|32000|44100|48000
channel_masks AUDIO_CHANNEL_IN_5POINT1|AUDIO_CHANNEL_IN_MONO|AUDIO_CHANNEL_IN_STEREO|AUDIO_CHANNEL_IN_FRONT_BACK
formats AUDIO_FORMAT_PCM_16_BIT
devices AUDIO_DEVICE_IN_BUILTIN_MIC|AUDIO_DEVICE_IN_BACK_MIC
}
voice_rx {
sampling_rates 8000|16000|48000
channel_masks AUDIO_CHANNEL_IN_STEREO|AUDIO_CHANNEL_IN_MONO
formats AUDIO_FORMAT_PCM_16_BIT
devices AUDIO_DEVICE_IN_TELEPHONY_RX
}
}
}
a2dp {
outputs {
a2dp {
sampling_rates 44100
channel_masks AUDIO_CHANNEL_OUT_STEREO
formats AUDIO_FORMAT_PCM_16_BIT
devices AUDIO_DEVICE_OUT_ALL_A2DP
}
}
inputs {
a2dp {
sampling_rates 44100|48000
channel_masks AUDIO_CHANNEL_IN_MONO|AUDIO_CHANNEL_IN_STEREO
formats AUDIO_FORMAT_PCM_16_BIT
devices AUDIO_DEVICE_IN_BLUETOOTH_A2DP
}
}
}
usb {
outputs {
usb_accessory {
sampling_rates 44100
channel_masks AUDIO_CHANNEL_OUT_STEREO
formats AUDIO_FORMAT_PCM_16_BIT
devices AUDIO_DEVICE_OUT_USB_ACCESSORY
}
usb_device {
sampling_rates dynamic
channel_masks dynamic
formats dynamic
devices AUDIO_DEVICE_OUT_USB_DEVICE
}
}
inputs {
usb_device {
sampling_rates dynamic
channel_masks dynamic
formats dynamic
devices AUDIO_DEVICE_IN_USB_DEVICE
}
}
}
r_submix {
outputs {
submix {
sampling_rates 48000
channel_masks AUDIO_CHANNEL_OUT_STEREO
formats AUDIO_FORMAT_PCM_16_BIT
devices AUDIO_DEVICE_OUT_REMOTE_SUBMIX
}
}
inputs {
submix {
sampling_rates 48000
channel_masks AUDIO_CHANNEL_IN_STEREO
formats AUDIO_FORMAT_PCM_16_BIT
devices AUDIO_DEVICE_IN_REMOTE_SUBMIX
}
}
}
}

View File

@ -0,0 +1,42 @@
<?xml version="1.0" encoding="ISO-8859-1"?>
<!--- Copyright (c) 2014, 2016, The Linux Foundation. All rights reserved. -->
<!--- -->
<!--- Redistribution and use in source and binary forms, with or without -->
<!--- modification, are permitted provided that the following conditions are -->
<!--- met: -->
<!--- * Redistributions of source code must retain the above copyright -->
<!--- notice, this list of conditions and the following disclaimer. -->
<!--- * Redistributions in binary form must reproduce the above -->
<!--- copyright notice, this list of conditions and the following -->
<!--- disclaimer in the documentation and/or other materials provided -->
<!--- with the distribution. -->
<!--- * Neither the name of The Linux Foundation nor the names of its -->
<!--- contributors may be used to endorse or promote products derived -->
<!--- from this software without specific prior written permission. -->
<!--- -->
<!--- THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -->
<!--- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -->
<!--- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -->
<!--- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -->
<!--- BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -->
<!--- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -->
<!--- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -->
<!--- BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -->
<!--- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE -->
<!--- OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -->
<!--- IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -->
<listen_platform_info>
<device name="DEVICE_HANDSET_APE_ACDB_ID" acdb_id="100" />
<device name="DEVICE_HANDSET_CPE_ACDB_ID" acdb_id="128" />
<ctrl name="execution_type" value="CPE" /> <!-- value: "CPE" "APE" -->
<ctrl name="max_cpe_sessions" value="1" />
<ctrl name="max_cpe_keywords" value="6" />
<ctrl name="max_cpe_kw_user_pairs" value="6" />
<ctrl name="max_ape_sessions" value="8" />
<ctrl name="max_ape_keywords" value="10" />
<ctrl name="max_ape_kw_user_pairs" value="10" />
<ctrl name="dump_lab_data" value="false" /> <!-- value: "true" "false" -->
<!-- If value is true, it requires write permissions to /data folder to -->
<!-- dump lab data to file under /data/LHAL foloder. Do "chmod 777 /data/" -->
</listen_platform_info>

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,290 @@
<?xml version="1.0" encoding="ISO-8859-1"?>
<!-- Copyright (c) 2015-2016, The Linux Foundation. All rights reserved. -->
<!-- -->
<!-- Redistribution and use in source and binary forms, with or without -->
<!-- modification, are permitted provided that the following conditions are -->
<!-- met: -->
<!-- * Redistributions of source code must retain the above copyright -->
<!-- notice, this list of conditions and the following disclaimer. -->
<!-- * Redistributions in binary form must reproduce the above -->
<!-- copyright notice, this list of conditions and the following -->
<!-- disclaimer in the documentation and/or other materials provided -->
<!-- with the distribution. -->
<!-- * Neither the name of The Linux Foundation nor the names of its -->
<!-- contributors may be used to endorse or promote products derived -->
<!-- from this software without specific prior written permission. -->
<!-- -->
<!-- THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -->
<!-- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -->
<!-- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -->
<!-- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -->
<!-- BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -->
<!-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -->
<!-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -->
<!-- BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -->
<!-- OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -->
<!-- IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -->
<mixer>
<!-- These are the initial mixer settings -->
<ctl name="Voice Rx Device Mute" id="0" value="0" />
<ctl name="Voice Rx Device Mute" id="1" value="-1" />
<ctl name="Voice Rx Device Mute" id="2" value="20" />
<ctl name="Voice Tx Mute" id="0" value="0" />
<ctl name="Voice Tx Mute" id="1" value="-1" />
<ctl name="Voice Tx Mute" id="2" value="500" />
<ctl name="Voice Rx Gain" id="0" value="0" />
<ctl name="Voice Rx Gain" id="1" value="-1" />
<ctl name="Voice Rx Gain" id="2" value="20" />
<ctl name="HPHL Volume" value="97" />
<ctl name="HPHR Volume" value="97" />
<ctl name="RX1 Digital Volume" value="84" />
<ctl name="RX2 Digital Volume" value="84" />
<ctl name="RX3 Digital Volume" value="84" />
<ctl name="RX4 Digital Volume" value="84" />
<ctl name="ADC2 Volume" value="19" />
<ctl name="DEC5 Volume" value="84" />
<ctl name="DEC10 Volume" value="84" />
<ctl name="COMP0 Switch" value="0" />
<ctl name="COMP1 Switch" value="0" />
<ctl name="AUX_PCM_RX Audio Mixer MultiMedia1" value="0" />
<ctl name="AUX_PCM_RX Audio Mixer MultiMedia4" value="0" />
<ctl name="AUX_PCM_RX Audio Mixer MultiMedia5" value="0" />
<ctl name="MultiMedia1 Mixer AUX_PCM_UL_TX" value="0" />
<ctl name="MultiMedia8 Mixer AUX_PCM_UL_TX" value="0" />
<ctl name="IIR1 INP1 MUX" value="ZERO" />
<ctl name="SLIM TX9 MUX" value="ZERO" />
<ctl name="DEC10 MUX" value="ZERO" />
<ctl name="DEC5 MUX" value="ZERO" />
<ctl name="RX2 MIX2 INP1" value="ZERO" />
<ctl name="RX1 MIX2 INP1" value="ZERO" />
<ctl name="RX7 MIX1 INP1" value="ZERO" />
<ctl name="RX2 MIX1 INP2" value="ZERO" />
<ctl name="RX2 MIX1 INP1" value="ZERO" />
<ctl name="RX1 MIX1 INP1" value="ZERO" />
<ctl name="HPHL DAC Switch" value="0" />
<ctl name="QUAT_MI2S_RX Channels" value="One" />
<ctl name="QUAT_MI2S_TX Channels" value="One" />
<ctl name="SLIM RX4 MUX" value="AIF1_PB" />
<ctl name="SLIM RX3 MUX" value="AIF1_PB" />
<ctl name="CLASS_H_DSM MUX" value="ZERO" />
<!-- Voice -->
<ctl name="Voice Stub Tx Mixer PRI_MI2S_TX" value="0" />
<ctl name="QUAT_MI2S_RX_Voice Mixer Voice Stub" value="0" />
<ctl name="Voice Stub Tx Mixer QUAT_MI2S_TX" value="0" />
<ctl name="PRI_MI2S_RX_Voice Mixer Voice Stub" value="0" />
<ctl name="QUAT_MI2S_RX Port Mixer PRI_MI2S_TX" value="0" />
<ctl name="PRI_MI2S_RX Port Mixer QUAT_MI2S_TX" value="0" />
<!-- Voice end-->
<!-- VoLTE -->
<ctl name="VoLTE Stub Tx Mixer PRI_MI2S_TX" value="0" />
<ctl name="QUAT_MI2S_RX_Voice Mixer VoLTE Stub" value="0" />
<ctl name="VoLTE Stub Tx Mixer QUAT_MI2S_TX" value="0" />
<ctl name="PRI_MI2S_RX_Voice Mixer VoLTE Stub" value="0" />
<ctl name="QUAT_MI2S_RX Port Mixer PRI_MI2S_TX" value="0" />
<ctl name="PRI_MI2S_RX Port Mixer QUAT_MI2S_TX" value="0" />
<!-- VoLTE end-->
<!-- Voice2 -->
<ctl name="Voice2 Stub Tx Mixer PRI_MI2S_TX" value="0" />
<ctl name="QUAT_MI2S_RX_Voice Mixer Voice2 Stub" value="0" />
<ctl name="Voice2 Stub Tx Mixer QUAT_MI2S_TX" value="0" />
<ctl name="PRI_MI2S_RX_Voice Mixer Voice2 Stub" value="0" />
<ctl name="QUAT_MI2S_RX Port Mixer PRI_MI2S_TX" value="0" />
<ctl name="PRI_MI2S_RX Port Mixer QUAT_MI2S_TX" value="0" />
<!-- Voice2 end-->
<!-- RT Proxy Cal -->
<ctl name="RT_PROXY_1_RX SetCalMode" value="CAL_MODE_NONE" />
<ctl name="RT_PROXY_1_TX SetCalMode" value="CAL_MODE_NONE" />
<!-- RT Proxy Cal end -->
<!-- These are audio route (FE to BE) specific mixer settings -->
<path name="deep-buffer-playback">
<ctl name="AUX_PCM_RX Audio Mixer MultiMedia1" value="1" />
</path>
<path name="low-latency-playback">
<ctl name="AUX_PCM_RX Audio Mixer MultiMedia5" value="1" />
</path>
<path name="compress-offload-playback">
<ctl name="AUX_PCM_RX Audio Mixer MultiMedia4" value="1" />
</path>
<path name="audio-record">
<ctl name="MultiMedia1 Mixer AUX_PCM_UL_TX" value="1" />
</path>
<path name="audio-record-compress">
<ctl name="MultiMedia8 Mixer AUX_PCM_UL_TX" value="1" />
</path>
<path name="voice-call">
<ctl name="Voice Stub Tx Mixer PRI_MI2S_TX" value="1" />
<ctl name="QUAT_MI2S_RX_Voice Mixer Voice Stub" value="1" />
<ctl name="Voice Stub Tx Mixer QUAT_MI2S_TX" value="1" />
<ctl name="PRI_MI2S_RX_Voice Mixer Voice Stub" value="1" />
<ctl name="QUAT_MI2S_RX Port Mixer PRI_MI2S_TX" value="1" />
<ctl name="PRI_MI2S_RX Port Mixer QUAT_MI2S_TX" value="1" />
</path>
<path name="volte-call">
<ctl name="VoLTE Stub Tx Mixer PRI_MI2S_TX" value="1" />
<ctl name="QUAT_MI2S_RX_Voice Mixer VoLTE Stub" value="1" />
<ctl name="VoLTE Stub Tx Mixer QUAT_MI2S_TX" value="1" />
<ctl name="PRI_MI2S_RX_Voice Mixer VoLTE Stub" value="1" />
<ctl name="QUAT_MI2S_RX Port Mixer PRI_MI2S_TX" value="1" />
<ctl name="PRI_MI2S_RX Port Mixer QUAT_MI2S_TX" value="1" />
</path>
<path name="voice2-call">
<ctl name="Voice2 Stub Tx Mixer PRI_MI2S_TX" value="1" />
<ctl name="QUAT_MI2S_RX_Voice Mixer Voice2 Stub" value="1" />
<ctl name="Voice2 Stub Tx Mixer QUAT_MI2S_TX" value="1" />
<ctl name="PRI_MI2S_RX_Voice Mixer Voice2 Stub" value="1" />
<ctl name="QUAT_MI2S_RX Port Mixer PRI_MI2S_TX" value="1" />
<ctl name="PRI_MI2S_RX Port Mixer QUAT_MI2S_TX" value="1" />
</path>
<!-- These are actual sound device specific mixer settings -->
<path name="adc1">
<ctl name="AIF1_CAP Mixer SLIM TX9" value="1"/>
<ctl name="QUAT_MI2S_TX Channels" value="One" />
<ctl name="SLIM TX9 MUX" value="DEC5" />
<ctl name="DEC5 MUX" value="ADC2" />
</path>
<path name="adc2">
<ctl name="AIF1_CAP Mixer SLIM TX9" value="1"/>
<ctl name="QUAT_MI2S_TX Channels" value="One" />
<ctl name="SLIM TX9 MUX" value="DEC5" />
<ctl name="DEC5 MUX" value="ADC2" />
</path>
<path name="dmic1">
<ctl name="AIF1_CAP Mixer SLIM TX9" value="1"/>
<ctl name="QUAT_MI2S_TX Channels" value="One" />
<ctl name="SLIM TX9 MUX" value="DEC10" />
<ctl name="DEC10 MUX" value="DMIC3" />
</path>
<path name="speaker">
<ctl name="SLIM RX3 MUX" value="AIF1_PB" />
<ctl name="SLIM RX4 MUX" value="AIF1_PB" />
<ctl name="QUAT_MI2S_RX Channels" value="Two" />
<ctl name="RX1 MIX1 INP1" value="RX3" />
<ctl name="RX2 MIX1 INP1" value="RX4" />
<ctl name="CLASS_H_DSM MUX" value="DSM_HPHL_RX1" />
<ctl name="HPHL DAC Switch" value="1" />
<ctl name="COMP1 Switch" value="1" />
</path>
<path name="sidetone-iir">
<ctl name="IIR1 Enable Band1" value="1" />
<ctl name="IIR1 Enable Band2" value="1" />
<ctl name="IIR1 Enable Band3" value="1" />
<ctl name="IIR1 Enable Band4" value="1" />
<ctl name="IIR1 Enable Band5" value="1" />
</path>
<path name="sidetone-headphones">
<path name="sidetone-iir" />
<ctl name="IIR1 INP1 Volume" value="77" />
<ctl name="RX1 MIX2 INP1" value="IIR1" />
<ctl name="RX2 MIX2 INP1" value="IIR1" />
</path>
<path name="sidetone-handset">
<path name="sidetone-iir" />
<ctl name="IIR1 INP1 Volume" value="62" />
<ctl name="RX1 MIX2 INP1" value="IIR1" />
</path>
<path name="speaker-mic">
<path name="dmic1" />
</path>
<path name="handset">
<ctl name="SLIM RX3 MUX" value="AIF1_PB" />
<ctl name="SLIM RX4 MUX" value="AIF1_PB" />
<ctl name="QUAT_MI2S_RX Channels" value="Two" />
<ctl name="RX1 MIX1 INP1" value="RX3" />
<ctl name="RX2 MIX1 INP1" value="RX4" />
<ctl name="CLASS_H_DSM MUX" value="DSM_HPHL_RX1" />
<ctl name="HPHL DAC Switch" value="1" />
<ctl name="COMP1 Switch" value="1" />
</path>
<path name="handset-mic">
<path name="adc2" />
</path>
<path name="headphones">
<ctl name="SLIM RX3 MUX" value="AIF1_PB" />
<ctl name="SLIM RX4 MUX" value="AIF1_PB" />
<ctl name="QUAT_MI2S_RX Channels" value="Two" />
<ctl name="RX1 MIX1 INP1" value="RX3" />
<ctl name="RX2 MIX1 INP1" value="RX4" />
<ctl name="CLASS_H_DSM MUX" value="DSM_HPHL_RX1" />
<ctl name="HPHL DAC Switch" value="1" />
<ctl name="COMP1 Switch" value="1" />
</path>
<path name="line">
<path name="headphones" />
</path>
<path name="headset-mic">
<path name="adc2" />
<ctl name="ADC2 Volume" value="13" />
</path>
<path name="voice-handset">
<path name="handset" />
</path>
<path name="voice-handset-tmus">
<path name="handset" />
</path>
<path name="voice-speaker">
<path name="speaker" />
</path>
<path name="voice-speaker-mic">
<path name="speaker-mic" />
</path>
<path name="voice-headphones">
<path name="headphones" />
</path>
<path name="voice-line">
<path name="voice-headphones" />
</path>
<path name="voice-headset-mic">
<path name="headset-mic" />
<path name="sidetone-headphones" />
<ctl name="ADC2 Volume" value="13" />
</path>
<path name="speaker-and-headphones">
<path name="headphones" />
<ctl name="RX7 MIX1 INP1" value="RX1" />
<ctl name="COMP0 Switch" value="1" />
</path>
<path name="speaker-and-line">
<path name="speaker-and-headphones" />
</path>
<path name="voice-rec-mic">
<path name="handset-mic" />
</path>
<path name="camcorder-mic">
<path name="handset-mic" />
</path>
</mixer>

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,158 @@
#BOARD_USES_GENERIC_AUDIO := true
#
#AUDIO_FEATURE_FLAGS
BOARD_USES_ALSA_AUDIO := true
USE_CUSTOM_AUDIO_POLICY := 1
BOARD_SUPPORTS_SOUND_TRIGGER := true
AUDIO_USE_LL_AS_PRIMARY_OUTPUT := true
AUDIO_FEATURE_ENABLED_VBAT_MONITOR := true
AUDIO_FEATURE_ENABLED_ANC_HEADSET := true
AUDIO_FEATURE_ENABLED_COMPRESS_CAPTURE := false
AUDIO_FEATURE_ENABLED_COMPRESS_VOIP := true
AUDIO_FEATURE_ENABLED_CUSTOMSTEREO := true
AUDIO_FEATURE_ENABLED_EXTN_FORMATS := true
AUDIO_FEATURE_ENABLED_EXTN_FLAC_DECODER := true
AUDIO_FEATURE_ENABLED_EXTN_RESAMPLER := true
AUDIO_FEATURE_ENABLED_FM_POWER_OPT := true
AUDIO_FEATURE_ENABLED_FLUENCE := true
AUDIO_FEATURE_ENABLED_HDMI_SPK := true
AUDIO_FEATURE_ENABLED_HDMI_EDID := true
AUDIO_FEATURE_ENABLED_HFP := true
AUDIO_FEATURE_ENABLED_INCALL_MUSIC := false
AUDIO_FEATURE_ENABLED_MULTI_VOICE_SESSIONS := true
AUDIO_FEATURE_ENABLED_PCM_OFFLOAD := true
AUDIO_FEATURE_ENABLED_PCM_OFFLOAD_24 := true
AUDIO_FEATURE_ENABLED_FLAC_OFFLOAD := true
AUDIO_FEATURE_ENABLED_VORBIS_OFFLOAD := true
AUDIO_FEATURE_ENABLED_WMA_OFFLOAD := true
AUDIO_FEATURE_ENABLED_ALAC_OFFLOAD := true
AUDIO_FEATURE_ENABLED_APE_OFFLOAD := true
AUDIO_FEATURE_ENABLED_AAC_ADTS_OFFLOAD := true
#AUDIO_FEATURE_ENABLED_PROXY_DEVICE := true
AUDIO_FEATURE_ENABLED_KPI_OPTIMIZE := true
AUDIO_FEATURE_ENABLED_SPKR_PROTECTION := true
AUDIO_FEATURE_ENABLED_SSR := true
AUDIO_FEATURE_ENABLED_ACDB_LICENSE := true
AUDIO_FEATURE_ENABLED_DTS_EAGLE := false
BOARD_USES_SRS_TRUEMEDIA := true
DTS_CODEC_M_ := true
AUDIO_FEATURE_ENABLED_DEV_ARBI := true
MM_AUDIO_ENABLED_FTM := true
MM_AUDIO_ENABLED_SAFX := true
TARGET_USES_QCOM_MM_AUDIO := true
AUDIO_FEATURE_ENABLED_HW_ACCELERATED_EFFECTS := false
AUDIO_FEATURE_ENABLED_SOURCE_TRACKING := true
AUDIO_FEATURE_ENABLED_AUDIOSPHERE := true
##AUDIO_FEATURE_FLAGS
#
# Audio configuration file
ifeq ($(TARGET_USES_AOSP), true)
PRODUCT_COPY_FILES += \
device/qcom/common/media/audio_policy.conf:system/etc/audio_policy.conf
else
PRODUCT_COPY_FILES += \
hardware/qcom/audio/configs/msmcobalt/audio_policy.conf:system/etc/audio_policy.conf
endif
PRODUCT_COPY_FILES += \
hardware/qcom/audio/configs/msmcobalt/audio_output_policy.conf:system/vendor/etc/audio_output_policy.conf \
hardware/qcom/audio/configs/msmcobalt/audio_effects.conf:system/vendor/etc/audio_effects.conf \
hardware/qcom/audio/configs/msmcobalt/mixer_paths.xml:system/etc/mixer_paths.xml \
hardware/qcom/audio/configs/msmcobalt/mixer_paths_tasha.xml:system/etc/mixer_paths_tasha.xml \
hardware/qcom/audio/configs/msmcobalt/mixer_paths_dtp.xml:system/etc/mixer_paths_dtp.xml \
hardware/qcom/audio/configs/msmcobalt/mixer_paths_i2s.xml:system/etc/mixer_paths_i2s.xml \
hardware/qcom/audio/configs/msmcobalt/aanc_tuning_mixer.txt:system/etc/aanc_tuning_mixer.txt \
hardware/qcom/audio/configs/msmcobalt/audio_platform_info_i2s.xml:system/etc/audio_platform_info_i2s.xml \
hardware/qcom/audio/configs/msmcobalt/sound_trigger_mixer_paths.xml:system/etc/sound_trigger_mixer_paths.xml \
hardware/qcom/audio/configs/msmcobalt/sound_trigger_mixer_paths_wcd9330.xml:system/etc/sound_trigger_mixer_paths_wcd9330.xml \
hardware/qcom/audio/configs/msmcobalt/sound_trigger_platform_info.xml:system/etc/sound_trigger_platform_info.xml \
hardware/qcom/audio/configs/msmcobalt/audio_platform_info.xml:system/etc/audio_platform_info.xml
# Listen configuration file
PRODUCT_COPY_FILES += \
hardware/qcom/audio/configs/msmcobalt/listen_platform_info.xml:system/etc/listen_platform_info.xml
# Reduce client buffer size for fast audio output tracks
PRODUCT_PROPERTY_OVERRIDES += \
af.fast_track_multiplier=1
# Low latency audio buffer size in frames
PRODUCT_PROPERTY_OVERRIDES += \
audio_hal.period_size=192
##fluencetype can be "fluence" or "fluencepro" or "none"
PRODUCT_PROPERTY_OVERRIDES += \
ro.qc.sdk.audio.fluencetype=none\
persist.audio.fluence.voicecall=true\
persist.audio.fluence.voicerec=false\
persist.audio.fluence.speaker=true
#disable tunnel encoding
PRODUCT_PROPERTY_OVERRIDES += \
tunnel.audio.encode=false
#Buffer size in kbytes for compress offload playback
PRODUCT_PROPERTY_OVERRIDES += \
audio.offload.buffer.size.kb=32
#Enable offload audio video playback by default
PRODUCT_PROPERTY_OVERRIDES += \
audio.offload.video=true
#Enable 16 bit PCM offload by default
PRODUCT_PROPERTY_OVERRIDES += \
audio.offload.pcm.16bit.enable=true
#Enable 24 bit PCM offload by default
PRODUCT_PROPERTY_OVERRIDES += \
audio.offload.pcm.24bit.enable=true
#Enable audio track offload by default
PRODUCT_PROPERTY_OVERRIDES += \
audio.offload.track.enable=true
#Enable music through deep buffer
PRODUCT_PROPERTY_OVERRIDES += \
audio.deep_buffer.media=true
#enable voice path for PCM VoIP by default
PRODUCT_PROPERTY_OVERRIDES += \
use.voice.path.for.pcm.voip=true
#Enable multi channel aac through offload
PRODUCT_PROPERTY_OVERRIDES += \
audio.offload.multiaac.enable=true
#Enable DS2, Hardbypass feature for Dolby
PRODUCT_PROPERTY_OVERRIDES += \
audio.dolby.ds2.enabled=true\
audio.dolby.ds2.hardbypass=true
#Disable Multiple offload sesison
PRODUCT_PROPERTY_OVERRIDES += \
audio.offload.multiple.enabled=false
#Disable Compress passthrough playback
PRODUCT_PROPERTY_OVERRIDES += \
audio.offload.passthrough=false
#Disable surround sound recording
PRODUCT_PROPERTY_OVERRIDES += \
ro.qc.sdk.audio.ssr=false
#enable dsp gapless mode by default
PRODUCT_PROPERTY_OVERRIDES += \
audio.offload.gapless.enabled=true
#enable pbe effects
PRODUCT_PROPERTY_OVERRIDES += \
audio.safx.pbe.enabled=true
#parser input buffer size(256kb) in byte stream mode
PRODUCT_PROPERTY_OVERRIDES += \
audio.parser.ip.buffer.size=262144

View File

@ -0,0 +1,105 @@
<?xml version="1.0" encoding="ISO-8859-1"?>
<!--- Copyright (c) 2014-2016, The Linux Foundation. All rights reserved. -->
<!--- -->
<!--- Redistribution and use in source and binary forms, with or without -->
<!--- modification, are permitted provided that the following conditions are -->
<!--- met: -->
<!--- * Redistributions of source code must retain the above copyright -->
<!--- notice, this list of conditions and the following disclaimer. -->
<!--- * Redistributions in binary form must reproduce the above -->
<!--- copyright notice, this list of conditions and the following -->
<!--- disclaimer in the documentation and/or other materials provided -->
<!--- with the distribution. -->
<!--- * Neither the name of The Linux Foundation nor the names of its -->
<!--- contributors may be used to endorse or promote products derived -->
<!--- from this software without specific prior written permission. -->
<!--- -->
<!--- THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -->
<!--- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -->
<!--- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -->
<!--- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -->
<!--- BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -->
<!--- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -->
<!--- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -->
<!--- BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -->
<!--- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE -->
<!--- OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -->
<!--- IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -->
<mixer>
<!-- These are the initial mixer settings -->
<ctl name="LSM1 MUX" value="None" />
<ctl name="LSM2 MUX" value="None" />
<ctl name="LSM3 MUX" value="None" />
<ctl name="LSM4 MUX" value="None" />
<ctl name="LSM5 MUX" value="None" />
<ctl name="LSM6 MUX" value="None" />
<ctl name="LSM7 MUX" value="None" />
<ctl name="LSM8 MUX" value="None" />
<ctl name="SLIMBUS_5_TX LSM Function" value="None" />
<ctl name="MADONOFF Switch" value="0" />
<ctl name="MAD Input" value="DMIC1" />
<ctl name="MAD_BROADCAST Switch" value="0" />
<ctl name="TX13 INP MUX" value="CDC_DEC_5" />
<ctl name="AIF4_MAD Mixer SLIM TX12" value="0" />
<ctl name="AIF4_MAD Mixer SLIM TX13" value="0" />
<ctl name="CPE AFE MAD Enable" value="0"/>
<path name="listen-voice-wakeup-1">
<ctl name="SLIMBUS_5_TX LSM Function" value="AUDIO" />
<ctl name="LSM1 MUX" value="SLIMBUS_5_TX" />
</path>
<path name="listen-voice-wakeup-2">
<ctl name="SLIMBUS_5_TX LSM Function" value="AUDIO" />
<ctl name="LSM2 MUX" value="SLIMBUS_5_TX" />
</path>
<path name="listen-voice-wakeup-3">
<ctl name="SLIMBUS_5_TX LSM Function" value="AUDIO" />
<ctl name="LSM3 MUX" value="SLIMBUS_5_TX" />
</path>
<path name="listen-voice-wakeup-4">
<ctl name="SLIMBUS_5_TX LSM Function" value="AUDIO" />
<ctl name="LSM4 MUX" value="SLIMBUS_5_TX" />
</path>
<path name="listen-voice-wakeup-5">
<ctl name="SLIMBUS_5_TX LSM Function" value="AUDIO" />
<ctl name="LSM5 MUX" value="SLIMBUS_5_TX" />
</path>
<path name="listen-voice-wakeup-6">
<ctl name="SLIMBUS_5_TX LSM Function" value="AUDIO" />
<ctl name="LSM6 MUX" value="SLIMBUS_5_TX" />
</path>
<path name="listen-voice-wakeup-7">
<ctl name="SLIMBUS_5_TX LSM Function" value="AUDIO" />
<ctl name="LSM7 MUX" value="SLIMBUS_5_TX" />
</path>
<path name="listen-voice-wakeup-8">
<ctl name="SLIMBUS_5_TX LSM Function" value="AUDIO" />
<ctl name="LSM8 MUX" value="SLIMBUS_5_TX" />
</path>
<path name="listen-cpe-handset-mic">
<ctl name="MADONOFF Switch" value="1" />
<ctl name="TX13 INP MUX" value="CPE_TX_PP" />
<ctl name="AIF4_MAD Mixer SLIM TX13" value="1" />
<ctl name="MAD Input" value="DMIC0" />
<ctl name="CPE AFE MAD Enable" value="1"/>
</path>
<!-- path name used for low bandwidth FTRT codec interface -->
<path name="listen-cpe-handset-mic low-speed-intf">
<ctl name="MADONOFF Switch" value="1" />
<ctl name="AIF4_MAD Mixer SLIM TX12" value="1" />
<ctl name="MAD Input" value="DMIC0" />
<ctl name="CPE AFE MAD Enable" value="1"/>
</path>
<path name="listen-ape-handset-mic">
<ctl name="MAD_BROADCAST Switch" value="1" />
<ctl name="TX13 INP MUX" value="MAD_BRDCST" />
<ctl name="AIF4_MAD Mixer SLIM TX13" value="1" />
<ctl name="MAD Input" value="DMIC0" />
</path>
</mixer>

View File

@ -0,0 +1,89 @@
<?xml version="1.0" encoding="ISO-8859-1"?>
<!--- Copyright (c) 2015-2016, The Linux Foundation. All rights reserved. -->
<!--- -->
<!--- Redistribution and use in source and binary forms, with or without -->
<!--- modification, are permitted provided that the following conditions are -->
<!--- met: -->
<!--- * Redistributions of source code must retain the above copyright -->
<!--- notice, this list of conditions and the following disclaimer. -->
<!--- * Redistributions in binary form must reproduce the above -->
<!--- copyright notice, this list of conditions and the following -->
<!--- disclaimer in the documentation and/or other materials provided -->
<!--- with the distribution. -->
<!--- * Neither the name of The Linux Foundation nor the names of its -->
<!--- contributors may be used to endorse or promote products derived -->
<!--- from this software without specific prior written permission. -->
<!--- -->
<!--- THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -->
<!--- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -->
<!--- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -->
<!--- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -->
<!--- BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -->
<!--- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -->
<!--- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -->
<!--- BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -->
<!--- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE -->
<!--- OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -->
<!--- IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -->
<mixer>
<!-- These are the initial mixer settings -->
<ctl name="LSM1 MUX" value="None" />
<ctl name="LSM2 MUX" value="None" />
<ctl name="LSM3 MUX" value="None" />
<ctl name="LSM4 MUX" value="None" />
<ctl name="LSM5 MUX" value="None" />
<ctl name="LSM6 MUX" value="None" />
<ctl name="LSM7 MUX" value="None" />
<ctl name="LSM8 MUX" value="None" />
<ctl name="SLIMBUS_5_TX LSM Function" value="None" />
<ctl name="MADONOFF Switch" value="0" />
<ctl name="MAD Input" value="DMIC1" />
<ctl name="CPE AFE MAD Enable" value="0"/>
<path name="listen-voice-wakeup-1">
<ctl name="LSM1 MUX" value="SLIMBUS_5_TX" />
<ctl name="SLIMBUS_5_TX LSM Function" value="AUDIO" />
</path>
<path name="listen-voice-wakeup-2">
<ctl name="LSM2 MUX" value="SLIMBUS_5_TX" />
<ctl name="SLIMBUS_5_TX LSM Function" value="AUDIO" />
</path>
<path name="listen-voice-wakeup-3">
<ctl name="LSM3 MUX" value="SLIMBUS_5_TX" />
<ctl name="SLIMBUS_5_TX LSM Function" value="AUDIO" />
</path>
<path name="listen-voice-wakeup-4">
<ctl name="LSM4 MUX" value="SLIMBUS_5_TX" />
<ctl name="SLIMBUS_5_TX LSM Function" value="AUDIO" />
</path>
<path name="listen-voice-wakeup-5">
<ctl name="LSM5 MUX" value="SLIMBUS_5_TX" />
<ctl name="SLIMBUS_5_TX LSM Function" value="AUDIO" />
</path>
<path name="listen-voice-wakeup-6">
<ctl name="LSM6 MUX" value="SLIMBUS_5_TX" />
<ctl name="SLIMBUS_5_TX LSM Function" value="AUDIO" />
</path>
<path name="listen-voice-wakeup-7">
<ctl name="LSM7 MUX" value="SLIMBUS_5_TX" />
<ctl name="SLIMBUS_5_TX LSM Function" value="AUDIO" />
</path>
<path name="listen-voice-wakeup-8">
<ctl name="LSM8 MUX" value="SLIMBUS_5_TX" />
<ctl name="SLIMBUS_5_TX LSM Function" value="AUDIO" />
</path>
<path name="listen-cpe-handset-mic">
<ctl name="MADONOFF Switch" value="1" />
<ctl name="MAD Input" value="DMIC1" />
<ctl name="CPE AFE MAD Enable" value="1"/>
</path>
<path name="listen-ape-handset-mic">
<ctl name="MADONOFF Switch" value="1" />
<ctl name="MAD Input" value="DMIC1" />
</path>
</mixer>

View File

@ -0,0 +1,58 @@
<?xml version="1.0" encoding="ISO-8859-1"?>
<!--- Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. -->
<!--- -->
<!--- Redistribution and use in source and binary forms, with or without -->
<!--- modification, are permitted provided that the following conditions are -->
<!--- met: -->
<!--- * Redistributions of source code must retain the above copyright -->
<!--- notice, this list of conditions and the following disclaimer. -->
<!--- * Redistributions in binary form must reproduce the above -->
<!--- copyright notice, this list of conditions and the following -->
<!--- disclaimer in the documentation and/or other materials provided -->
<!--- with the distribution. -->
<!--- * Neither the name of The Linux Foundation nor the names of its -->
<!--- contributors may be used to endorse or promote products derived -->
<!--- from this software without specific prior written permission. -->
<!--- -->
<!--- THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -->
<!--- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -->
<!--- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -->
<!--- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -->
<!--- BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -->
<!--- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -->
<!--- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -->
<!--- BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -->
<!--- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE -->
<!--- OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -->
<!--- IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -->
<sound_trigger_platform_info>
<device name="DEVICE_HANDSET_APE_ACDB_ID" value="100" />
<device name="DEVICE_HANDSET_CPE_ACDB_ID" value="128" />
<ctrl name="execution_type" value="CPE" /> <!-- value: "CPE" "APE" -->
<ctrl name="max_cpe_sessions" value="1" />
<ctrl name="max_ape_sessions" value="8" />
<ctrl name="enable_failure_detection" value="false" />
<!-- vendor_uuid for a soundmodel. More than one vendor_uuid tags can be -->
<!-- listed in sequence, the below vendor uuid is reserved for QTI -->
<!-- module. ISV must use their own unique vendor uuid. app_type, -->
<!-- module_id, param_id must match to the calibration database -->
<!-- If ISV vendor_uuid is present, execution_type will be forced to APE -->
<vendor_uuid value="68ab2d40-e860-11e3-95ef-0002a5d5c51b" app_type="2" library="libsmwrapper.so">
<!-- format: "ADPCM_packet" or "PCM_packet" !-->
<!-- transfer_mode: "FTRT" or "RT" -->
<!-- kw_duration is in milli seconds. It is valid only for FTRT transfer mode -->
<capture_keyword format="PCM_packet" transfer_mode="RT" kw_duration="2000" />
<param_type name="load_sound_model" module_id="0x00012C0D" param_id="0x00012C14"/>
<param_type name="unload_sound_model" module_id="0x00012C0D" param_id="0x00012C15"/>
<param_type name="confidence_levels" module_id="0x00012C0D" param_id="0x00012C07"/>
<param_type name="operation_mode" module_id="0x00012C0D" param_id="0x00012C02"/>
<ctrl name="max_cpe_phrases" value="6" />
<ctrl name="max_cpe_users" value="3" />
<ctrl name="max_ape_phrases" value="10" />
<ctrl name="max_ape_users" value="10" />
<ctrl name="client_capture_read_delay" value="2000" /> <!-- in milli seconds -->
</vendor_uuid>
</sound_trigger_platform_info>