dereference
/
android_hardware_qcom_audio
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
android_hardware_qcom_audio/hal/Android.mk

302 lines
8.5 KiB
Makefile
Raw Normal View History

add new audio HAL (disabled) -- build when BOARD_USES_LEGACY_ALSA_AUDIO is not defined -- under hal/ -- uses audio_route library Change-Id: Ibf2706ba55e5a2dbd69b5f4cfac8a5cc68220b86 Signed-off-by: Iliyan Malchev <malchev@google.com>
2013-01-18 00:50:22 +00:00
ifeq ($(strip $(BOARD_USES_ALSA_AUDIO)),true)
LOCAL_PATH := $(call my-dir)
include $(CLEAR_VARS)
LOCAL_ARM_MODE := arm
hal: Add support for msm8226 platform msm8226 uses common code base as msm8974. Change-Id: Ibea589637c7a9464ba274156ab43820c82124bd3
2013-08-20 01:47:21 +00:00
AUDIO_PLATFORM := $(TARGET_BOARD_PLATFORM)
hal: Add support for multiple hardware variants - Most of the targets supports multiple hardware variants such as MTP, CDP, Fluid, Liquid etc. The mixer paths for certain devices may vary on some of the variants. For example, the mixer controls for speaker device are different on msm8974 MTP and Fluid variants. - Update audio HAL to select corresponding entry in the mixer_paths.xml file based on HW information. Change-Id: I060f2e6c331344dd41417c19fb688ff27a129308 Conflicts: hal/Android.mk
2013-10-29 13:07:44 +00:00
hal: add support for msmcobalt Add initial audio support for MSMCOBALT target Change-Id: I06cd6a558d8622c7b8ff82b5531478adea96e631
2016-03-05 02:31:22 +00:00
ifneq ($(filter msm8974 msm8226 msm8610 apq8084 msm8994 msm8992 msm8996 msmcobalt,$(TARGET_BOARD_PLATFORM)),)
hal: Add support for msm8226 platform msm8226 uses common code base as msm8974. Change-Id: Ibea589637c7a9464ba274156ab43820c82124bd3
2013-08-20 01:47:21 +00:00
# B-family platform uses msm8974 code base
AUDIO_PLATFORM = msm8974
hal: Add support for multiple hardware variants - Most of the targets supports multiple hardware variants such as MTP, CDP, Fluid, Liquid etc. The mixer paths for certain devices may vary on some of the variants. For example, the mixer controls for speaker device are different on msm8974 MTP and Fluid variants. - Update audio HAL to select corresponding entry in the mixer_paths.xml file based on HW information. Change-Id: I060f2e6c331344dd41417c19fb688ff27a129308 Conflicts: hal/Android.mk
2013-10-29 13:07:44 +00:00
MULTIPLE_HW_VARIANTS_ENABLED := true
Hal: Initial commit for B-family targets - Remove broadside dual-mic config specific code which is not supported anymore. - change output device for voice calls. Voice calls should enable side tone,use voice handset device which enables side tone during voice calls. - Add Fluence quad MIC support for voice calls in speaker mode. - Correct the audio hal library name to reflect the target name. - Compile the msm8974 platform code for all b-family targets. - Fix the low latency number accordingly for msm8610 in platform code Change-Id: I8f16ac8eef8ef4bec1295bf73208ebaf90303603
2013-10-07 22:23:41 +00:00
ifneq ($(filter msm8610,$(TARGET_BOARD_PLATFORM)),)
LOCAL_CFLAGS := -DPLATFORM_MSM8610
endif
audio_hal: Add support for multi voice sessions Update HAL to add multi SIM voice support. Seperate out voice features to voice files. Add getprop/setprop for BT sample rate, Fluence and Slow talk. Change-Id: Ief61466f78c7b915549981a28fc7ff32731607a5
2013-10-01 22:49:05 +00:00
ifneq ($(filter msm8226,$(TARGET_BOARD_PLATFORM)),)
LOCAL_CFLAGS := -DPLATFORM_MSM8x26
endif
hal: add voice call support on apq8084 APQ8084 uses external modem to make voice calls. APQ uses CSD QMI interface to communicate with external modem. Add csd client apis to support voice calls Change-Id: I11fe0cc614ee38c42e95b40d5cd5e2d8b3afd43a
2013-11-13 19:46:52 +00:00
ifneq ($(filter apq8084,$(TARGET_BOARD_PLATFORM)),)
LOCAL_CFLAGS := -DPLATFORM_APQ8084
endif
hal: add support for msm8994 - Adding msm8994 target support in makefile Change-Id: Id924e4a7d5df21e605429d85c7c49ede00d7f402
2014-05-20 01:20:59 +00:00
ifneq ($(filter msm8994,$(TARGET_BOARD_PLATFORM)),)
LOCAL_CFLAGS := -DPLATFORM_MSM8994
endif
hal : add 8992 for msm8992 audio Enabled msm8992 audio hal same as msm8994 Change-Id: Ie2289925679cf9a39931e65314050a1fe92a9e95
2014-12-09 21:08:07 +00:00
ifneq ($(filter msm8992,$(TARGET_BOARD_PLATFORM)),)
LOCAL_CFLAGS := -DPLATFORM_MSM8994
endif
audio: renaming thulium to msm8996 Use appropriate SOC name. Change-Id: I08e17ec9b240869c5357ad181f1fb17a0d06b969
2015-03-24 18:56:14 +00:00
ifneq ($(filter msm8996,$(TARGET_BOARD_PLATFORM)),)
LOCAL_CFLAGS := -DPLATFORM_MSM8996
hal: add support for thulium target Adding thulium target support in makefile Change-Id: Ibb33e9545a511ea85fc29cf56f72cd0b5d368e7e
2014-10-16 01:29:34 +00:00
endif
hal: add support for msmcobalt Add initial audio support for MSMCOBALT target Change-Id: I06cd6a558d8622c7b8ff82b5531478adea96e631
2016-03-05 02:31:22 +00:00
ifneq ($(filter msmcobalt,$(TARGET_BOARD_PLATFORM)),)
LOCAL_CFLAGS := -DPLATFORM_MSMCOBALT
endif
hal: Add support for msm8226 platform msm8226 uses common code base as msm8974. Change-Id: Ibea589637c7a9464ba274156ab43820c82124bd3
2013-08-20 01:47:21 +00:00
endif
Remove internal code name of msmtitanium for msm8952. Change-Id: Iad3786188e82287061a62226d1b748f9d8f1d343
2016-03-10 11:53:15 +00:00
ifneq ($(filter msm8916 msm8909 msm8952 msm8937 thorium msm8953 msmgold,$(TARGET_BOARD_PLATFORM)),)
Audio: Bear(8916) Audio HAL bringup changes - Added 8916 audio HAL spacific changes Merged 8916 BU changes to mainline Change-Id: I8bfb06f328f1851d924d1b1219bc7317afa38b0d
2014-03-05 12:03:47 +00:00
AUDIO_PLATFORM = msm8916
MULTIPLE_HW_VARIANTS_ENABLED := true
LOCAL_CFLAGS := -DPLATFORM_MSM8916
Rename ferrum to msm8909 This change is to rename ferrum to chipset name- msm8909 Change-Id: I96bfe67673c0fd9e4476a1dc17b88fa911c1b5bc
2014-09-17 08:04:31 +00:00
ifneq ($(filter msm8909,$(TARGET_BOARD_PLATFORM)),)
hal: Add support for ferrum(8909) sound cards -Add entry for ferrum(8909) sound card name Change-Id: I64989e184b97f1ae0f1365da29b61297d579f6ac
2014-07-11 13:44:23 +00:00
LOCAL_CFLAGS := -DPLATFORM_MSM8909
endif
Audio: Bear(8916) Audio HAL bringup changes - Added 8916 audio HAL spacific changes Merged 8916 BU changes to mainline Change-Id: I8bfb06f328f1851d924d1b1219bc7317afa38b0d
2014-03-05 12:03:47 +00:00
endif
Audio: Bear family(8916) audio HAL bringup changes - Added new files for platform specific code Separate platform specific code from generic audio HAL code. Platform specific code is: - platform initialization - pcm device selection - pcm stream configuration - sound device selection - acdb ID selection Modified makefiles for 8916 support Change-Id: Idf53d19c355feb26ce9f35f9e5dd0734b542eae6
2014-01-30 13:42:53 +00:00
add new audio HAL (disabled) -- build when BOARD_USES_LEGACY_ALSA_AUDIO is not defined -- under hal/ -- uses audio_route library Change-Id: Ibf2706ba55e5a2dbd69b5f4cfac8a5cc68220b86 Signed-off-by: Iliyan Malchev <malchev@google.com>
2013-01-18 00:50:22 +00:00
LOCAL_SRC_FILES := \
audio_hw.c \
audio_hal: Add support for multi voice sessions Update HAL to add multi SIM voice support. Seperate out voice features to voice files. Add getprop/setprop for BT sample rate, Fluence and Slow talk. Change-Id: Ief61466f78c7b915549981a28fc7ff32731607a5
2013-10-01 22:49:05 +00:00
voice.c \
hal: Rename & move platform_parser.c Move platform_parser to root hal directory. Rename platform_parser to platform_info. Change name of XML file read from platform_info.xml to audio_platform_info.xml. The xml now only needs information for ACDB ID's that you want overwritten. Names in the XML now match sound device enums in platform.c. Change-Id: I6f9bfcf4149f08d88cb2a95ba021bdf7296aaf4d
2014-01-10 21:49:02 +00:00
platform_info.c \
hal: Add support for msm8226 platform msm8226 uses common code base as msm8974. Change-Id: Ibea589637c7a9464ba274156ab43820c82124bd3
2013-08-20 01:47:21 +00:00
$(AUDIO_PLATFORM)/platform.c
add new audio HAL (disabled) -- build when BOARD_USES_LEGACY_ALSA_AUDIO is not defined -- under hal/ -- uses audio_route library Change-Id: Ibf2706ba55e5a2dbd69b5f4cfac8a5cc68220b86 Signed-off-by: Iliyan Malchev <malchev@google.com>
2013-01-18 00:50:22 +00:00
hal: configure playback stream rendering based on output policy For the usecases where individual streams have to be rendered through different post processing chain on DSP an output policy is defined. The output configuration is read from the output policy file based on the stream atrributes to render the playback appropriately. Change-Id: I095592013ffa5b04bea69254026ebb78e2934822
2014-03-10 21:43:05 +00:00
LOCAL_SRC_FILES += audio_extn/audio_extn.c \
audio_extn/utils.c
hal: add DSDA support on APQ targets -This change adds DSDA support for APQ based targets where external modem is used for voice calls. -Add new CSD API to support local call hold. Change-Id: I7743a1df43dc1abac4e325ff104ec1bb64c9e12b
2014-04-25 18:08:08 +00:00
LOCAL_C_INCLUDES += $(TARGET_OUT_INTERMEDIATES)/KERNEL_OBJ/usr/include
LOCAL_ADDITIONAL_DEPENDENCIES += $(TARGET_OUT_INTERMEDIATES)/KERNEL_OBJ/usr
hal: Support for anc/aanc/proxy audio features Added support for anc/aanc/proxy audio features Change-Id: Id6ebdb9094635563cfafce9dc1d3449efe25bda4
2013-10-04 23:13:44 +00:00
hal: update feature flag for HDMI EDID - Compile edid.c when AUDIO_FEATURE_ENABLED_HDMI_EDID is enabled. Change-Id: I2ff1fd591fe2e5693271f37179e0e7a9fbe70e4a
2015-02-26 23:03:10 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_HDMI_EDID)),true)
hal: compilation fix for extended feature flags - Fix compilation error for offload, Dolby, HDMI pass through, FLAC decoder, and hardware accelerated effects when extended feature flags are disabled. Change-Id: I5b36d7668f63a396ed930d62c0337c2c3f311c95
2015-07-01 23:57:32 +00:00
LOCAL_CFLAGS += -DHDMI_EDID
hal: Add support for parsing hdmi edid information Add support for parsing hdmi edid data and setting channel map to asm Parse edid data on hdmi connection and invalidat on disconnection. Fix audio playback errors on HDMI when source channel count is greater than sink channel count for offload playback. Change-Id: I1e0a8335611a87974cb273431659938a0b345e68
2014-09-09 16:50:01 +00:00
LOCAL_SRC_FILES += edid.c
endif
hal: add support to use low lantecy as primay output - Add support to use low lantency output as primary output when AUDIO_USE_LL_AS_PRIMARY_OUTPUT is enabled Change-Id: Ie7faf9f7af4c97b7afdda8084b7acf162abbc0b6
2015-03-17 01:10:58 +00:00
ifeq ($(strip $(AUDIO_USE_LL_AS_PRIMARY_OUTPUT)),true)
LOCAL_CFLAGS += -DUSE_LL_AS_PRIMARY_OUTPUT
endif
hal: update audio feature flags - update audio feature flags to use AUDIO_FEATURE_ENABLED_XXX instead of AUDIO_FEATURE_DISABLED_XXX. - These feature flags are defined by target board config file Change-Id: Iba482d8b72bfa2675877d833d7abcb93d4cf4907
2014-05-16 19:10:55 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_PCM_OFFLOAD)),true)
hal: add missing flags for extended features - add missing feature flags and definitions to compile hal without extended features enabled. Change-Id: I8c04ae54e6597ed43de60b2d01ca333070aef675
2014-04-04 00:47:22 +00:00
LOCAL_CFLAGS += -DPCM_OFFLOAD_ENABLED
endif
hal: update audio feature flags - update audio feature flags to use AUDIO_FEATURE_ENABLED_XXX instead of AUDIO_FEATURE_DISABLED_XXX. - These feature flags are defined by target board config file Change-Id: Iba482d8b72bfa2675877d833d7abcb93d4cf4907
2014-05-16 19:10:55 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_ANC_HEADSET)),true)
hal: Support for anc/aanc/proxy audio features Added support for anc/aanc/proxy audio features Change-Id: Id6ebdb9094635563cfafce9dc1d3449efe25bda4
2013-10-04 23:13:44 +00:00
LOCAL_CFLAGS += -DANC_HEADSET_ENABLED
endif
hal: Add support to dynamically configure MI2S rx sample rate Add support to dynamically configure MI2S rx sample rate to support sampling rates upto 192KHZ on head phones for internal codec. Add and set explicit mixer control to notify the sample rate value to machine driver. CRs-Fixed: 970158 Change-Id: Ib7968eaf9aeb5f9911f3c985af61a16a7e06744d
2016-01-29 10:01:04 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_HIFI_AUDIO)),true)
LOCAL_CFLAGS += -DHIFI_AUDIO_ENABLED
endif
hal: Add support to enable VBat feature Add support to enable VBat feature. This includes required changes to select VBat speaker devices for audio and voice usecases and sending the VBat calibration data to codec driver. Change-Id: I2234bee3cc4d6f16934a4b27ef9da21cde74bb48
2015-09-11 08:11:30 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_VBAT_MONITOR)),true)
LOCAL_CFLAGS += -DVBAT_MONITOR_ENABLED
endif
hal: update audio feature flags - update audio feature flags to use AUDIO_FEATURE_ENABLED_XXX instead of AUDIO_FEATURE_DISABLED_XXX. - These feature flags are defined by target board config file Change-Id: Iba482d8b72bfa2675877d833d7abcb93d4cf4907
2014-05-16 19:10:55 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_FLUENCE)),true)
hal: Add support for turning fluence on/off - To turn on/off fluence we need to change the build prop file and changes will take effect after reboot. There is no option to turn it on/off without rebooting the target. - Add set_params support to turn it on and off. An option is given to user to select the dualmic fluence based on which set_parms is invoked. Change-Id: I51d580af820d8e0b1bd1384c941ffba3f96813ca CRs-Fixed: 605087
2014-03-27 14:17:56 +00:00
LOCAL_CFLAGS += -DFLUENCE_ENABLED
endif
hal: update audio feature flags - update audio feature flags to use AUDIO_FEATURE_ENABLED_XXX instead of AUDIO_FEATURE_DISABLED_XXX. - These feature flags are defined by target board config file Change-Id: Iba482d8b72bfa2675877d833d7abcb93d4cf4907
2014-05-16 19:10:55 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_PROXY_DEVICE)),true)
hal: Support for anc/aanc/proxy audio features Added support for anc/aanc/proxy audio features Change-Id: Id6ebdb9094635563cfafce9dc1d3449efe25bda4
2013-10-04 23:13:44 +00:00
LOCAL_CFLAGS += -DAFE_PROXY_ENABLED
endif
hal: Performance mode during recording usecase Put system in performance mode during start of recording usecase to meet KPI values of cold start input latency. Change-Id: I30c202c39b4b15b37e7245fc2f1a427377178baa Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
2014-12-03 19:55:17 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_KPI_OPTIMIZE)),true)
LOCAL_CFLAGS += -DKPI_OPTIMIZE_ENABLED
endif
hal: fix compilation issues with audio FM extention - Update FM device references to match latest definitions to fix compilation of FM extention. - Update FM feature flag for power optimization. Change-Id: I17a9e240e552c4089d3e9c7a25e437fb5b5433f9
2015-10-27 03:40:36 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_FM_POWER_OPT)),true)
LOCAL_CFLAGS += -DFM_POWER_OPT
hal: Support for fm audio features Added support for fm audio feature and hal single instance fix Change-Id: I189fd089b45a7e268e0af4ba4ef3eefd22a3f2ff
2013-10-06 21:39:35 +00:00
LOCAL_SRC_FILES += audio_extn/fm.c
endif
hal: update audio feature flags - update audio feature flags to use AUDIO_FEATURE_ENABLED_XXX instead of AUDIO_FEATURE_DISABLED_XXX. - These feature flags are defined by target board config file Change-Id: Iba482d8b72bfa2675877d833d7abcb93d4cf4907
2014-05-16 19:10:55 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_USBAUDIO)),true)
hal: Support for usb audio features Added support for usb audio feature and related proxy device support Change-Id: Ia64e9eff20fbbada6f08795686cdbc0ba462bafb
2013-10-08 01:40:05 +00:00
LOCAL_CFLAGS += -DUSB_HEADSET_ENABLED
LOCAL_SRC_FILES += audio_extn/usb.c
endif
hal: update audio feature flags - update audio feature flags to use AUDIO_FEATURE_ENABLED_XXX instead of AUDIO_FEATURE_DISABLED_XXX. - These feature flags are defined by target board config file Change-Id: Iba482d8b72bfa2675877d833d7abcb93d4cf4907
2014-05-16 19:10:55 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_HFP)),true)
hal: Added support for HFP - Added setparameter to be set from hfp app to enable and disable hfp session. - Implemeted start and stop hfp session which takes care of switching device and setting the session Change-Id: Ie8697328ccbfee09d0d162f6fad01ddb552e4f83
2013-11-05 23:57:39 +00:00
LOCAL_CFLAGS += -DHFP_ENABLED
LOCAL_SRC_FILES += audio_extn/hfp.c
endif
hal: Support for usb audio features Added support for usb audio feature and related proxy device support Change-Id: Ia64e9eff20fbbada6f08795686cdbc0ba462bafb
2013-10-08 01:40:05 +00:00
hal: update audio feature flags - update audio feature flags to use AUDIO_FEATURE_ENABLED_XXX instead of AUDIO_FEATURE_DISABLED_XXX. - These feature flags are defined by target board config file Change-Id: Iba482d8b72bfa2675877d833d7abcb93d4cf4907
2014-05-16 19:10:55 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_CUSTOMSTEREO)),true)
hal: send custom stereo state to driver Update custom stereo state to driver as received from Apps Change-Id: Ifc3f448aecec15e7055440786338b1bbf1ddf68b
2014-02-11 04:07:12 +00:00
LOCAL_CFLAGS += -DCUSTOM_STEREO_ENABLED
endif
hal: update audio feature flags - update audio feature flags to use AUDIO_FEATURE_ENABLED_XXX instead of AUDIO_FEATURE_DISABLED_XXX. - These feature flags are defined by target board config file Change-Id: Iba482d8b72bfa2675877d833d7abcb93d4cf4907
2014-05-16 19:10:55 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_SSR)),true)
hal: Add support for ssr audio feature Update audio HAL to support surround sound recording (5.1 channels) Change-Id: I5b24340251b55ad5c602f2de0a0b4c7672ba729b
2013-10-19 19:38:54 +00:00
LOCAL_CFLAGS += -DSSR_ENABLED
LOCAL_SRC_FILES += audio_extn/ssr.c
hal: Add support for 3-mic surround sound recording Add support for stereo surround sound recording using 3 mics. Change-Id: I741dd5507d72ac45dff8006d3875abe8dbdc2df2
2015-07-02 17:36:23 +00:00
LOCAL_C_INCLUDES += $(TARGET_OUT_HEADERS)/mm-audio/surround_sound_3mic/
hal: add exported common headers to LOCAL_C_INCLUDES Needed to get comdef.h from the exported set of common headers Change-Id: Ib90c8c836748b2d09f03a5c387ddb5c867ff1e64
2014-03-24 18:25:42 +00:00
LOCAL_C_INCLUDES += $(TARGET_OUT_HEADERS)/common/inc/
hal: Add support for ssr audio feature Update audio HAL to support surround sound recording (5.1 channels) Change-Id: I5b24340251b55ad5c602f2de0a0b4c7672ba729b
2013-10-19 19:38:54 +00:00
endif
hal: update audio feature flags - update audio feature flags to use AUDIO_FEATURE_ENABLED_XXX instead of AUDIO_FEATURE_DISABLED_XXX. - These feature flags are defined by target board config file Change-Id: Iba482d8b72bfa2675877d833d7abcb93d4cf4907
2014-05-16 19:10:55 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_MULTI_VOICE_SESSIONS)),true)
hal: compile voice extensions based on board config flag Compile voice extensions based on the flag AUDIO_FEATURE_DISABLED_MULTI_VOICE_SESSIONS defined in BoardConfigVendor.mk. Change-Id: I06c42bf4b79294fed2077c1d2771ed155f68de00
2013-10-25 23:24:27 +00:00
LOCAL_CFLAGS += -DMULTI_VOICE_SESSION_ENABLED
LOCAL_SRC_FILES += voice_extn/voice_extn.c
hal: add DSDA support on APQ targets -This change adds DSDA support for APQ based targets where external modem is used for voice calls. -Add new CSD API to support local call hold. Change-Id: I7743a1df43dc1abac4e325ff104ec1bb64c9e12b
2014-04-25 18:08:08 +00:00
hal: update audio feature flags - update audio feature flags to use AUDIO_FEATURE_ENABLED_XXX instead of AUDIO_FEATURE_DISABLED_XXX. - These feature flags are defined by target board config file Change-Id: Iba482d8b72bfa2675877d833d7abcb93d4cf4907
2014-05-16 19:10:55 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_INCALL_MUSIC)),true)
hal: compile voice extensions based on board config flag Compile voice extensions based on the flag AUDIO_FEATURE_DISABLED_MULTI_VOICE_SESSIONS defined in BoardConfigVendor.mk. Change-Id: I06c42bf4b79294fed2077c1d2771ed155f68de00
2013-10-25 23:24:27 +00:00
LOCAL_CFLAGS += -DINCALL_MUSIC_ENABLED
endif
hal: update audio feature flags - update audio feature flags to use AUDIO_FEATURE_ENABLED_XXX instead of AUDIO_FEATURE_DISABLED_XXX. - These feature flags are defined by target board config file Change-Id: Iba482d8b72bfa2675877d833d7abcb93d4cf4907
2014-05-16 19:10:55 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_COMPRESS_VOIP)),true)
hal: Add support for compressed voip Add support to enable voip calls using compressed audio formats. Change-Id: If20493b75befbcc56945e4309c8f01384948a7b5
2013-11-15 23:21:40 +00:00
LOCAL_CFLAGS += -DCOMPRESS_VOIP_ENABLED
LOCAL_SRC_FILES += voice_extn/compress_voip.c
endif
hal: configure playback stream rendering based on output policy For the usecases where individual streams have to be rendered through different post processing chain on DSP an output policy is defined. The output configuration is read from the output policy file based on the stream atrributes to render the playback appropriately. Change-Id: I095592013ffa5b04bea69254026ebb78e2934822
2014-03-10 21:43:05 +00:00
endif
hal: update audio feature flags - update audio feature flags to use AUDIO_FEATURE_ENABLED_XXX instead of AUDIO_FEATURE_DISABLED_XXX. - These feature flags are defined by target board config file Change-Id: Iba482d8b72bfa2675877d833d7abcb93d4cf4907
2014-05-16 19:10:55 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_EXTN_FORMATS)),true)
hal: set proper bitwidth and format values Set bitwidth as per the value in offloadInfo and define the values of audio formats to be consistent with those in audio.h. Change-Id: I49a3355eb51a4ba2fdcef0e68482ee5078e7798a
2015-08-12 12:51:25 +00:00
LOCAL_CFLAGS += -DAUDIO_EXTN_FORMATS_ENABLED
hal: Add support for speaker protection - Speaker protection feature protects the speaker from overheating. Change-Id: Ida4899534124eba203025915beba662e88a0f403
2013-10-28 21:06:03 +00:00
endif
hal: compile voice extensions based on board config flag Compile voice extensions based on the flag AUDIO_FEATURE_DISABLED_MULTI_VOICE_SESSIONS defined in BoardConfigVendor.mk. Change-Id: I06c42bf4b79294fed2077c1d2771ed155f68de00
2013-10-25 23:24:27 +00:00
hal: enable speaker protection ',' was added accidentally causing speaker protection not to be enabled. Remove that. Change-Id: Ieb714a50d297a1c92970d559b5336a2275359164
2014-07-16 23:18:51 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_SPKR_PROTECTION)),true)
hal: Add support for speaker protection - Speaker protection feature protects the speaker from overheating. Change-Id: Ida4899534124eba203025915beba662e88a0f403
2013-10-28 21:06:03 +00:00
LOCAL_CFLAGS += -DSPKR_PROT_ENABLED
LOCAL_SRC_FILES += audio_extn/spkr_protection.c
endif
hal: compile voice extensions based on board config flag Compile voice extensions based on the flag AUDIO_FEATURE_DISABLED_MULTI_VOICE_SESSIONS defined in BoardConfigVendor.mk. Change-Id: I06c42bf4b79294fed2077c1d2771ed155f68de00
2013-10-25 23:24:27 +00:00
hal: Add support for multiple hardware variants - Most of the targets supports multiple hardware variants such as MTP, CDP, Fluid, Liquid etc. The mixer paths for certain devices may vary on some of the variants. For example, the mixer controls for speaker device are different on msm8974 MTP and Fluid variants. - Update audio HAL to select corresponding entry in the mixer_paths.xml file based on HW information. Change-Id: I060f2e6c331344dd41417c19fb688ff27a129308 Conflicts: hal/Android.mk
2013-10-29 13:07:44 +00:00
ifdef MULTIPLE_HW_VARIANTS_ENABLED
LOCAL_CFLAGS += -DHW_VARIANTS_ENABLED
LOCAL_SRC_FILES += $(AUDIO_PLATFORM)/hw_info.c
endif
hal: update audio feature flags - update audio feature flags to use AUDIO_FEATURE_ENABLED_XXX instead of AUDIO_FEATURE_DISABLED_XXX. - These feature flags are defined by target board config file Change-Id: Iba482d8b72bfa2675877d833d7abcb93d4cf4907
2014-05-16 19:10:55 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_COMPRESS_CAPTURE)),true)
hal: Add support for compressed capture - Add support for AMR-WB compressed capture. Change-Id: Ief591c5d1ccc6f8afb408abfff447787ee7bd7aa
2013-10-25 23:26:03 +00:00
LOCAL_CFLAGS += -DCOMPRESS_CAPTURE_ENABLED
LOCAL_SRC_FILES += audio_extn/compress_capture.c
endif
hardware/qcom/audio: Integrate Eagle framework for HeadphoneX Add support to integrate the Eagle framework for HeadphoneX audio post processing feature 1.1 Change-Id: Ib119c27c359950a6087d5e6ae200dfc1e83b7551 Signed-off-by: Jitendra Naruka <jitendra.naruka@dts.com> Signed-off-by: Alexy Joseph <alexyj@codeaurora.org>
2014-11-23 03:34:13 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_DTS_EAGLE)),true)
LOCAL_CFLAGS += -DDTS_EAGLE
LOCAL_SRC_FILES += audio_extn/dts_eagle.c
endif
hal: update audio feature flags - update audio feature flags to use AUDIO_FEATURE_ENABLED_XXX instead of AUDIO_FEATURE_DISABLED_XXX. - These feature flags are defined by target board config file Change-Id: Iba482d8b72bfa2675877d833d7abcb93d4cf4907
2014-05-16 19:10:55 +00:00
ifeq ($(strip $(DOLBY_DDP)),true)
hal: add Dolby DD+ support for AC3/EAC3 - Enhance offload formats to support AC3/EAC3. - update HMDI profile check to make sure that Dolby playback goes through compress offload path. Change-Id: Id8d1738305c117ccdf01c61bb5f4dd17e106b40b
2013-11-14 00:57:00 +00:00
LOCAL_CFLAGS += -DDS1_DOLBY_DDP_ENABLED
hal: Send device based parameters for DAP and DDP Send device based parameters for DAP and DDP Change-Id: I2cb977a573a3065f121d7aa096355ebda15f5948
2013-12-14 08:34:53 +00:00
LOCAL_SRC_FILES += audio_extn/dolby.c
hal: add Dolby DD+ support for AC3/EAC3 - Enhance offload formats to support AC3/EAC3. - update HMDI profile check to make sure that Dolby playback goes through compress offload path. Change-Id: Id8d1738305c117ccdf01c61bb5f4dd17e106b40b
2013-11-14 00:57:00 +00:00
endif
hal: Set ddp endpoint params for Dolby decoder - Set ddp endpoint params for Dolby decoder - Rename DOLBY_DAP macro. Legacy DS1 functions using mixer controls get enabled when dolby buildspec enables DOLBY_DAP macro. Avoid this by renaming the macro. Change-Id: I66c7d1896f4260754551f03852fa8c140abf0e53
2015-05-01 09:18:17 +00:00
ifeq ($(strip $(DS1_DOLBY_DAP)),true)
hal: Send device based parameters for DAP and DDP Send device based parameters for DAP and DDP Change-Id: I2cb977a573a3065f121d7aa096355ebda15f5948
2013-12-14 08:34:53 +00:00
LOCAL_CFLAGS += -DDS1_DOLBY_DAP_ENABLED
hal: update audio feature flags - update audio feature flags to use AUDIO_FEATURE_ENABLED_XXX instead of AUDIO_FEATURE_DISABLED_XXX. - These feature flags are defined by target board config file Change-Id: Iba482d8b72bfa2675877d833d7abcb93d4cf4907
2014-05-16 19:10:55 +00:00
ifneq ($(strip $(DOLBY_DDP)),true)
hal: Send device based parameters for DAP and DDP Send device based parameters for DAP and DDP Change-Id: I2cb977a573a3065f121d7aa096355ebda15f5948
2013-12-14 08:34:53 +00:00
LOCAL_SRC_FILES += audio_extn/dolby.c
endif
endif
hal: Support for FLAC 24 bit format in offload path - Add flac in supported codecs list - Set FLAC codec specific parameters - Set fragment size based on bit width and sampling rate for flac - Configure backend to 24/16 bit based on the current usecases running Change-Id: If013078e277fd3053fba6489345803f8f58bd86d
2014-08-04 21:23:35 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_EXTN_FLAC_DECODER)),true)
hal: add support to offload VORBIS, ALAC and APE formats Send ALAC and APE specific data to DSP as part of the metadata to support playback of ALAC and APE clips in offload mode. Force vorbis offload run in transcoded bit stream mode. Also move parsing of WMA and FLAC metadata to audio_extn.c from audio_hw.c. Change-Id: Ideccadff93d4c06e649cd535b8870e45ba26eaea
2015-04-24 13:42:43 +00:00
LOCAL_CFLAGS += -DFLAC_OFFLOAD_ENABLED
LOCAL_CFLAGS += -DCOMPRESS_METADATA_NEEDED
endif
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_VORBIS_OFFLOAD)),true)
LOCAL_CFLAGS += -DVORBIS_OFFLOAD_ENABLED
LOCAL_CFLAGS += -DCOMPRESS_METADATA_NEEDED
endif
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_WMA_OFFLOAD)),true)
LOCAL_CFLAGS += -DWMA_OFFLOAD_ENABLED
LOCAL_CFLAGS += -DCOMPRESS_METADATA_NEEDED
endif
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_ALAC_OFFLOAD)),true)
LOCAL_CFLAGS += -DALAC_OFFLOAD_ENABLED
LOCAL_CFLAGS += -DCOMPRESS_METADATA_NEEDED
endif
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_APE_OFFLOAD)),true)
LOCAL_CFLAGS += -DAPE_OFFLOAD_ENABLED
LOCAL_CFLAGS += -DCOMPRESS_METADATA_NEEDED
hal: Support for FLAC 24 bit format in offload path - Add flac in supported codecs list - Set FLAC codec specific parameters - Set fragment size based on bit width and sampling rate for flac - Configure backend to 24/16 bit based on the current usecases running Change-Id: If013078e277fd3053fba6489345803f8f58bd86d
2014-08-04 21:23:35 +00:00
endif
hal: Fix bit width for 24 bit PCM offload playback PCM offload bit width is selected as 16 bit even for 24 bit pcm offload playback streams if QTI_FLAC_DECODER flag is not defined. Fix this issue by defining appropriate flag PCM_OFFLOAD_ENABLED_24. Change-Id: I82169252770b764344bf4531fb994e2195244dde
2015-02-25 23:14:26 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_PCM_OFFLOAD_24)),true)
LOCAL_CFLAGS += -DPCM_OFFLOAD_ENABLED_24
endif
hal: Add support for AAC ADTS offload playback -In byte stream mode input bistream is configured with AAC ADTS format -Add change to configure ADSP in ADTS format if input is in ADTS format Change-Id: Ie423af6847e4bfd49722239105aaba4fecf9469b
2015-08-24 15:00:31 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_AAC_ADTS_OFFLOAD)),true)
LOCAL_CFLAGS += -DAAC_ADTS_OFFLOAD_ENABLED
endif
hal: add audio device arbitration extension The audio device arbitration extension enables audio HAL to manage shared resources by notifying clients when devices are required by audio HAL and when they can be used by the clients. This change is implemented as an audio extension. It dynamically loads a library which implements the arbitration and IPC mechanism Change-Id: I13ade59caecfd69639f5bf8892dba917502ae357
2014-05-13 10:01:37 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_DEV_ARBI)),true)
LOCAL_CFLAGS += -DDEV_ARBI_ENABLED
LOCAL_SRC_FILES += audio_extn/dev_arbi.c
endif
hal: add new devices for VoIP usecase for 8909 - Due to mips limitation on 8909, VoIP & record playback concurrency usecases should use non DS1 topology device. - Add new devices on Bear platform, which will be selected for VoIP & record playback usecases based on "rec.playback.conc.disabled" system property Change-Id: I676bb0a870c22d912e8422795abcbbe9cd115318
2014-10-26 10:00:55 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_RECORD_PLAY_CONCURRENCY)),true)
LOCAL_CFLAGS += -DRECORD_PLAY_CONCURRENCY
endif
hal: Update DS2 implementation to support ACDB based license mechanism -Add ACDB based licenese mechanism for Dolby DS2 implementation. -Add device to back end mapping for MSM8916 Change-Id: I0de4bd67fbfc26c21c4751e32ae2c45278a226d0 CRs-Fixed: 761339
2014-10-16 08:26:28 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_ACDB_LICENSE)), true)
LOCAL_CFLAGS += -DDOLBY_ACDB_LICENSE
endif
hal: Add changes for dolby DS2 -Add device to back end mapping for APQ8084 and MSM8994. -Set initialization info like sound card number, dmid to ds2 dap hal. -Add mixer control DS2 OnOff to enable or disable DS2 -A property "audio.dolby.ds2.enabled" is added to trigger the mixer control. -Reuse ds1 functions for checking dolby format and getting sound codec id. CRs-Fixed: 661095 661018 Conflicts: hal/audio_hw.c hal/msm8916/platform.c Change-Id: Iff5fdc49249eb035c2ccde18e190ccc6c3ff632a
2014-09-09 16:49:10 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_DS2_DOLBY_DAP)),true)
LOCAL_CFLAGS += -DDS2_DOLBY_DAP_ENABLED
hal: Set ddp endpoint params for Dolby decoder - Set ddp endpoint params for Dolby decoder - Rename DOLBY_DAP macro. Legacy DS1 functions using mixer controls get enabled when dolby buildspec enables DOLBY_DAP macro. Avoid this by renaming the macro. Change-Id: I66c7d1896f4260754551f03852fa8c140abf0e53
2015-05-01 09:18:17 +00:00
LOCAL_CFLAGS += -DDS1_DOLBY_DDP_ENABLED
hal: Add changes for dolby DS2 -Add device to back end mapping for APQ8084 and MSM8994. -Set initialization info like sound card number, dmid to ds2 dap hal. -Add mixer control DS2 OnOff to enable or disable DS2 -A property "audio.dolby.ds2.enabled" is added to trigger the mixer control. -Reuse ds1 functions for checking dolby format and getting sound codec id. CRs-Fixed: 661095 661018 Conflicts: hal/audio_hw.c hal/msm8916/platform.c Change-Id: Iff5fdc49249eb035c2ccde18e190ccc6c3ff632a
2014-09-09 16:49:10 +00:00
ifneq ($(strip $(DOLBY_DDP)),true)
hal: Set ddp endpoint params for Dolby decoder - Set ddp endpoint params for Dolby decoder - Rename DOLBY_DAP macro. Legacy DS1 functions using mixer controls get enabled when dolby buildspec enables DOLBY_DAP macro. Avoid this by renaming the macro. Change-Id: I66c7d1896f4260754551f03852fa8c140abf0e53
2015-05-01 09:18:17 +00:00
ifneq ($(strip $(DS1_DOLBY_DAP)),true)
hal: Add changes for dolby DS2 -Add device to back end mapping for APQ8084 and MSM8994. -Set initialization info like sound card number, dmid to ds2 dap hal. -Add mixer control DS2 OnOff to enable or disable DS2 -A property "audio.dolby.ds2.enabled" is added to trigger the mixer control. -Reuse ds1 functions for checking dolby format and getting sound codec id. CRs-Fixed: 661095 661018 Conflicts: hal/audio_hw.c hal/msm8916/platform.c Change-Id: Iff5fdc49249eb035c2ccde18e190ccc6c3ff632a
2014-09-09 16:49:10 +00:00
LOCAL_SRC_FILES += audio_extn/dolby.c
endif
endif
endif
hal: Audio HAL / APM changes for HDMI passthrough -Add support for HDMI passthrough for DD/DDP contents to HAL and APM. -Add mixer control to set volume on volume module on passthrough COPP. The mixer control takes zero volume for mute and unity volume for max volume. -DDP content requires sample rate to be four times native sample rate. HAL sample rate is changed to four times native rate from start output stream. During rapid pause/resume offload thread calls standby when there is no active track and no activity for over a second. On resume start output steam is called and sample rate is converted to four times its current value. This results in session to be started with invalid sampling rate and playback failures. -Add HDMI passthrough support for JOC format. Expose DDP/JOC as pass-through supported format if sink supports either DD or DDP. This is to allow support for pass-through convert based on edid data. -Deep buffer music stream does not switch back to HDMI after ringtone playback ends. Ringtone, alarm, notification etc are played on speaker if HDMI pass-through is enabled. The decision is taken based on stream or strategy. The decision to change the device from HDMI to speaker is taken based on the stream type. When a patricular stream ends use the reference count instead of stream type. -DAP is not turned on when switching from passthrough stream to deep buffer stream.DAP bypass call from HAL to DAP HAL expects integer pointer. Address of a bool variable is passed into the function. Corrupt value is set on driver instead of turn on/off causing random failures in DAP on/DAP bypass. Use same data type and use enumeration to make the function call readable. CRs-Fixed: 761339 Change-Id: Ided9439ec5e87233a1fec3ff9f50a1e9ba4cb788
2014-10-20 23:17:01 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_HDMI_PASSTHROUGH)),true)
LOCAL_CFLAGS += -DHDMI_PASSTHROUGH_ENABLED
endif
hal: add support for source tracking feature Fluence module on ADSP is upgraded to support source tracking, sound focus and audio zoom features. This change adds support for the same in audio HAL and is needed to support the features end-to-end. Source Tracking is the capability to identify the source of speech. Sound Focus is the capability to configure which sectors in the 360 degrees plane to listen to. Audio Zoom is the capability to combine the sound focus with other technologies so that a user can listen in on a particular source in a scene. Change-Id: I019b22d6541e6d1a10552d808c3320a998b86e48
2015-03-06 22:57:35 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_SOURCE_TRACKING)),true)
LOCAL_CFLAGS += -DSOURCE_TRACKING_ENABLED
LOCAL_SRC_FILES += audio_extn/source_track.c
endif
add new audio HAL (disabled) -- build when BOARD_USES_LEGACY_ALSA_AUDIO is not defined -- under hal/ -- uses audio_route library Change-Id: Ibf2706ba55e5a2dbd69b5f4cfac8a5cc68220b86 Signed-off-by: Iliyan Malchev <malchev@google.com>
2013-01-18 00:50:22 +00:00
LOCAL_SHARED_LIBRARIES := \
liblog \
libcutils \
libtinyalsa \
hal: Add support for Tunnel mode audio playback - Initial implementation to support audio playback in tunnel mode. Change-Id: I4ffa660bd9beb855fdfe6a7572d8f6b7eade7bd9
2013-07-17 22:22:04 +00:00
libtinycompress \
add new audio HAL (disabled) -- build when BOARD_USES_LEGACY_ALSA_AUDIO is not defined -- under hal/ -- uses audio_route library Change-Id: Ibf2706ba55e5a2dbd69b5f4cfac8a5cc68220b86 Signed-off-by: Iliyan Malchev <malchev@google.com>
2013-01-18 00:50:22 +00:00
libaudioroute \
hal: Rename & move platform_parser.c Move platform_parser to root hal directory. Rename platform_parser to platform_info. Change name of XML file read from platform_info.xml to audio_platform_info.xml. The xml now only needs information for ACDB ID's that you want overwritten. Names in the XML now match sound device enums in platform.c. Change-Id: I6f9bfcf4149f08d88cb2a95ba021bdf7296aaf4d
2014-01-10 21:49:02 +00:00
libdl \
hal: remove libmdmdetect library dependency This reverts commit 008aebd15ac8708399ca359ee835d9060e14ceb5. Original commit breaks the compilation of ASOP code with audio HAL when proprietary code is not present because libmdmdetect proprietary library is statically linked. Change-Id: I8f704b84181c0083e4b84140ff3e1e5ef28469c9
2014-08-07 23:44:25 +00:00
libexpat
add new audio HAL (disabled) -- build when BOARD_USES_LEGACY_ALSA_AUDIO is not defined -- under hal/ -- uses audio_route library Change-Id: Ibf2706ba55e5a2dbd69b5f4cfac8a5cc68220b86 Signed-off-by: Iliyan Malchev <malchev@google.com>
2013-01-18 00:50:22 +00:00
LOCAL_C_INCLUDES += \
external/tinyalsa/include \
hal: Add support for Tunnel mode audio playback - Initial implementation to support audio playback in tunnel mode. Change-Id: I4ffa660bd9beb855fdfe6a7572d8f6b7eade7bd9
2013-07-17 22:22:04 +00:00
external/tinycompress/include \
hal: Rename & move platform_parser.c Move platform_parser to root hal directory. Rename platform_parser to platform_info. Change name of XML file read from platform_info.xml to audio_platform_info.xml. The xml now only needs information for ACDB ID's that you want overwritten. Names in the XML now match sound device enums in platform.c. Change-Id: I6f9bfcf4149f08d88cb2a95ba021bdf7296aaf4d
2014-01-10 21:49:02 +00:00
external/expat/lib \
hal: Add support for pre-processing effects - Add support for AEC audio effect for voice communication. Bug: 7241490 Bug: 8325112 Change-Id: Ic33d2f1f7be86484f748627d9afabbe10c369c21 Signed-off-by: Eric Laurent <elaurent@google.com> Signed-off-by: Iliyan Malchev <malchev@google.com>
2013-04-16 22:55:53 +00:00
$(call include-path-for, audio-route) \
audio HAL: separate platform specific code Separate platform specific code from generic audio HAL code. Platform specific code is: - platform initialization - pcm device selection - pcm stream configuration - sound device selection - acdb ID selection - HDMI configuration Change-Id: Iaf327943fa8674aad0c22a71e7cbf4288a138c7d Conflicts: hal/audio_hw.c hal/audio_hw.h
2013-05-14 22:27:20 +00:00
$(call include-path-for, audio-effects) \
hal: Support for anc/aanc/proxy audio features Added support for anc/aanc/proxy audio features Change-Id: Id6ebdb9094635563cfafce9dc1d3449efe25bda4
2013-10-04 23:13:44 +00:00
$(LOCAL_PATH)/$(AUDIO_PLATFORM) \
hal: Add support for compressed voip Add support to enable voip calls using compressed audio formats. Change-Id: If20493b75befbcc56945e4309c8f01384948a7b5
2013-11-15 23:21:40 +00:00
$(LOCAL_PATH)/audio_extn \
hal: remove libmdmdetect library dependency This reverts commit 008aebd15ac8708399ca359ee835d9060e14ceb5. Original commit breaks the compilation of ASOP code with audio HAL when proprietary code is not present because libmdmdetect proprietary library is statically linked. Change-Id: I8f704b84181c0083e4b84140ff3e1e5ef28469c9
2014-08-07 23:44:25 +00:00
$(LOCAL_PATH)/voice_extn
add new audio HAL (disabled) -- build when BOARD_USES_LEGACY_ALSA_AUDIO is not defined -- under hal/ -- uses audio_route library Change-Id: Ibf2706ba55e5a2dbd69b5f4cfac8a5cc68220b86 Signed-off-by: Iliyan Malchev <malchev@google.com>
2013-01-18 00:50:22 +00:00
hal: Enable support for Listen voice wakeup feature enable the support for Listen voice wakeup feature by loading listen hal library dynamically. Change-Id: Ife8e71589620342e21b4c52751466edaccc536ef
2013-10-29 20:29:42 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_LISTEN)),true)
LOCAL_CFLAGS += -DAUDIO_LISTEN_ENABLED
LOCAL_C_INCLUDES += $(TARGET_OUT_HEADERS)/mm-audio/audio-listen
LOCAL_SRC_FILES += audio_extn/listen.c
endif
audio: Enable External HDMI support -For HDMI compliance, channel status bits should be configured for the external HDMI chip. -Hence HAL based on the output format i.e compressed or LPCM populates the channel_status information and passes it to the dai-driver which in turn configures the external HDMI chip Change-Id: Ibf192492d259a722070a08f4764fde9498dd268d
2015-05-13 05:22:34 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_EXT_HDMI)),true)
LOCAL_CFLAGS += -DAUDIO_EXTERNAL_HDMI_ENABLED
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_HDMI_PASSTHROUGH)),true)
LOCAL_C_INCLUDES += $(TARGET_OUT_HEADERS)/mm-audio/audio-parsers
LOCAL_SHARED_LIBRARIES += libaudioparsers
endif
endif
hal: support for sound trigger LAB and concurrency Sound trigger lookahead buffering data is read through audio hal. Also the audio hal has to inform sound trigger hal about concurrencies and subsytsem restart events. Audio Hal uses proprietary interface defined by sound trigger for communication with sound trigger hal. Change-Id: Id344077b40b481a953769518f8a6ac0adc13b709
2014-09-09 23:06:42 +00:00
ifeq ($(strip $(BOARD_SUPPORTS_SOUND_TRIGGER)),true)
LOCAL_CFLAGS += -DSOUND_TRIGGER_ENABLED
LOCAL_CFLAGS += -DSOUND_TRIGGER_PLATFORM_NAME=$(TARGET_BOARD_PLATFORM)
LOCAL_C_INCLUDES += $(TARGET_OUT_HEADERS)/mm-audio/sound_trigger
LOCAL_SRC_FILES += audio_extn/soundtrigger.c
endif
hal: Add support for AUXPCM BT Atheros BT chip uses AUXPCM instead of slimbus. Audio HAL has to use different mixer paths file depending on whether it's internal or external BT chip Change-Id: I78ae70462fed42d4260ae37070ba23e81779c866
2013-11-07 01:59:04 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_AUXPCM_BT)),true)
LOCAL_CFLAGS += -DAUXPCM_BT_ENABLED
endif
Merge remote-tracking branch 'quic/LA.BR.1' into HEAD * quic/LA.BR.1: (37 commits) hal: Performance mode during recording usecase audio: Support for compress offload recovery audio: Fix for clip skip issue during SSR hal: add checks for calibration buffer allocation failures mm-audio: aenc-aac: fix integer overflow for encoded buffer timestamp calculation hal: Add support for 8909 QRD skue hal: Fix for FM mute issue on start of FM record hal: Fix array length computation for backend id array. hal : set Non SA+ app type for PCM Capture hal : Fix for SA+ app type selection for PCM Capture usecase hal : Fix for SA+ app type selection for PCM Capture usecase hal: use 0 as default return value for out_get_render_position audio: hal: Add support for pm8916 on msm8909 hal: Define a new combo device for AANC and Fluence hal: Define a new combo device for AANC and Fluence hal: use 0 as default return value for out_get_render_position hal: Update DS2 implementation to support ACDB based license mechanism hal : Overwrite the APP type for PCM RX and TX path audio: HAL to support for peripheral manager hal : Set the input device for VOIP calls using audio path ... Conflicts: hal/Android.mk hal/audio_extn/audio_extn.c hal/audio_extn/audio_extn.h hal/audio_extn/dolby.c hal/audio_extn/utils.c hal/audio_hw.c hal/msm8916/hw_info.c hal/msm8916/platform.c hal/msm8974/platform.c hal/platform_api.h Change-Id: Ibfa171e8f3af713dbb2cffbaf2ca2b0df3e8ae73
2015-02-02 07:10:59 +00:00
ifeq ($(strip $(AUDIO_FEATURE_ENABLED_PM_SUPPORT)),true)
LOCAL_CFLAGS += -DPM_SUPPORT_ENABLED
LOCAL_SRC_FILES += audio_extn/pm.c
LOCAL_C_INCLUDES += $(TARGET_OUT_HEADERS)/libperipheralclient/inc
LOCAL_SHARED_LIBRARIES += libperipheral_client
endif
hal: fix compiler warnings which are now treated as errors With CLANG enabled and -Wall & -Werror being set in LOCAL_CFLAGS, all warnings are treated as errors. This commit fixes all the warnings most of which are about unused variables and functions. Change-Id: I32c6593fa0ad6a4fdca5dc8e6c76982a146a8bc6
2016-04-14 13:35:23 +00:00
LOCAL_CFLAGS += -Wall -Werror
hal: Fix warnings in audio HAL and policy Enable Wall and Werror and fix warnings in HAL and policy manager CRs-Fixed: 962049 Change-Id: Ie93c8f933943875ac68e8318d777602ed864f531
2016-01-29 23:49:38 +00:00
hal: make file change to export audio_defs.h - copy audio_defs.h to out target so that it can be included in AOSP code. Change-Id: I84996dd8821a48a9ec71a1164764bf28b91cd390
2014-08-04 22:49:24 +00:00
LOCAL_COPY_HEADERS_TO := mm-audio
LOCAL_COPY_HEADERS := audio_extn/audio_defs.h
Hal: Initial commit for B-family targets - Remove broadside dual-mic config specific code which is not supported anymore. - change output device for voice calls. Voice calls should enable side tone,use voice handset device which enables side tone during voice calls. - Add Fluence quad MIC support for voice calls in speaker mode. - Correct the audio hal library name to reflect the target name. - Compile the msm8974 platform code for all b-family targets. - Fix the low latency number accordingly for msm8610 in platform code Change-Id: I8f16ac8eef8ef4bec1295bf73208ebaf90303603
2013-10-07 22:23:41 +00:00
LOCAL_MODULE := audio.primary.$(TARGET_BOARD_PLATFORM)
add new audio HAL (disabled) -- build when BOARD_USES_LEGACY_ALSA_AUDIO is not defined -- under hal/ -- uses audio_route library Change-Id: Ibf2706ba55e5a2dbd69b5f4cfac8a5cc68220b86 Signed-off-by: Iliyan Malchev <malchev@google.com>
2013-01-18 00:50:22 +00:00
audio: Change LOCAL_MODULE_PATH to LOCAL_MODULE_RELATIVE_PATH To comply with multi-arch build system changes for 64-bit support, LOCAL_MODULE_RELATIVE_PATH needs to be used. Drop explicit use of LOCAL_MODULE_PATH, and use relative path to avoid build system to overwrite one of multi-arch library variants with the other arch variant. Change-Id: I21f9b952a79c3930b15ff5549ac3c21ca827cc3a
2014-05-29 19:48:15 +00:00
LOCAL_MODULE_RELATIVE_PATH := hw
add new audio HAL (disabled) -- build when BOARD_USES_LEGACY_ALSA_AUDIO is not defined -- under hal/ -- uses audio_route library Change-Id: Ibf2706ba55e5a2dbd69b5f4cfac8a5cc68220b86 Signed-off-by: Iliyan Malchev <malchev@google.com>
2013-01-18 00:50:22 +00:00
LOCAL_MODULE_TAGS := optional
include $(BUILD_SHARED_LIBRARY)
endif